Operations Continued...
9.Scanning (Fast forward/Fast backward)
•Scanning is a function for moving quickly forward or backward when the SHUTTLE is rotated.
•This unit supports 4 different speeds according to the rotating angle of the SHUTTLE.
•Turn the shuttle dial to begin scanning. The disc moves rapidly forward or backward and the sound is output. The current scan point is indicated on the LCD.
•Turn the shuttle dial clockwise to scan in the forward direction or counterclockwise to scan in the reverse direction.
10.Time display
Press the TIME button to select time display mode:
ELAPSED
3 
TIME
3
3 
5
6 
TIME
3 28 
7 4 
TIME
11. Matching the Beats Per Minute (BPM)
There are three tools available for matching the BPM of the two CDs:
•Use the pitch slider to adjust the BPM satirically.
•Use the PITCH BEND buttons to change the BPM temporarily.
•Turn the JOG dial to change the BPM temporarily.
12.Pitch Slider
•Before adjusting the BPM by sliding the pitch slider up or down, press the PITCH button to turn on the PITCH adjustment function.
•Slide the pitch slider up to decrease BPM, or down to increase BPM. The adjustment range is
13.Pitch Bending
•The BPM increases or decreases respectively while the PITCH BEND+ or PITCH BEND- button is pressed.
•The BPM increase depends on how long you hold the button. If you hold the button for about 1/2 second, the BPM will go either to +16% for PITCH BEND+ or
•The CD will return to the tempo indicated by the Pitch slider when you let go to the PITCH BEND+ or
14.Turn the JOG dial
•Turn the jog dial clockwise during play to increase the BMP in the forward direction, counterclockwise to decrease the BMP in the reverse direction.
•The faster you turn the wheel, the more the BMP changes.
•The BMP changes with a range of
When you release jog wheel, the CD will return to the tempo indicated by the pitch slider.
15