InFocus LP1200 appendix Operation of PC by remote control, Setting of SpacePointer, For Windows

Advanced feature with PC (Continue)

ENGLISH

Installation of software

For Windows 95

1.Start up Windows.

2.Insert the Projector driver CD-ROM into your CD- ROM drive.

3.Start up Program Manager.

Click the [Start] button and select the [Run (R)] com- mand. Then the [Run] dialog box is displayed.

4.If you inserted the CD-ROM to drive D, type [D: Win95\Sp\Setup] in the "command line" text box and click the "OK" button. The letter [D] may be different according to the drive you use.

5.When the setup program starts up, follow the on- screen instructions.

6.When the message “Completed” appears on screen, click the [Finish] button to complete the installation.

For Windows 3.1

1.	Start up Windows.
2.	Insert the Projector driver CD-ROM into your CD-
	ROM drive.
3.	Select the [Run (R)] command on the icon menu so
	that the dialog box [Run] is displayed.
4.	If you inserted the CD-ROM to drive D, type
	[D:Win31\Sp\install] in the "command line" text
	box and click the "OK" button. The letter [D] may

Operation of PC by remote control

The remote control provides remote PC operation for presentation from PC.

1.Press the RGB button to select RGB1 or RGB2.

2.Press the START/STOP button to ON.

The operation indicator will be illuminated.

3.Confirm that the cursor of the projector does not appear on the screen. If the cursor does appear, press the CURSOR button to OFF.

You can use the SELECT, CANCEL and DOUBLE CLICK button in the same way as the button on the mouse. You can also move the cursor of PC by using the remote control. For cursor moving, see page 25.

4.Press the START/STOP button to exit from PC control mode.

•Depending on the personal computer, SpacePointer may not work after leaving from the suspended mode. In this case, click the Apply button on the control panel. See below.

Setting of SpacePointer

For Windows

You can set the several settings in the SpacePointer control panel in the control panel folder.

•Mouse cursor size and color cannot be adjusted in the Windows 3.1.

	be different according to the drive you use.
5.	Select the [Installation (I)] commandon the instal-
	lation menu.
6.	When the setup program starts up, follow the on-
	screen instructions.
7.	When the message “completed” appears on screen,
	click the [OK] button to complete the installation.

For Macintosh

1.	Start up Macintosh.
2.	Insert the Projector driver CD-ROM into your CD-
	ROM drive.

SpacePointer
SpacePointer®
Enable/Disable	Enable	Disable
ReceiverCheck	ON	OFF

ConnectPort COM1 COM2 COM3 COM4

SLOW FAST

Change cursor

OK Cancel Apply Help

Enable/Disable

For normal use set to Enable. If you do not use SpacePointer, set to Disable.

Port selection

Used to select the port connected to the projector.

Tracking speed

If you click Fast, the cursor moves more than twice as fast as you move the space pointer. When you first try the remote control, set it to slow.

Size/color

Changes the size and color of the mouse cursor.

3.	Copy "Alps RSSPointer" file in the “US” folder of
	the “SpacePointer” folder to the system folder.
4.	Restart the Macintosh.

For Macintosh

You can set the several settings in the Alps RSSPointer control panel in the control panel folder.

Alps RSSPointer

ALPS SpacePointer

Monitor Size :			Monitor size
		Port :
	W		Port selection
		Modem

H

(W)(H)

1152 X 870

Slow

	Used to select the port connected
	to the projector.
Fast	Help
	Tracking speed
	If you click Fast, the cursor
	moves more than twice as fast
	as you move the space pointer.
	When you first try the remote
	control, set it to slow.

38