Eclipse - Fujitsu Ten AVN 30D manual Setting POS position selector, Touch switch Function

Basic operation

Adjusting sound quality

Setting POS (position selector)

The stereophonic position for obtaining optimum acoustic effects can be adjusted to match the number and position of passengers.

In addition, front-to-back, right-to-left volume balance can be adjusted for the selected position.

Touching the image of a seat

shown on the POS setting screen will change the position.

•The selected position will change its color to orange. Touching the seat again will cancel the selection. The four positions shown by the table below can be set.

•Touching OFF will cancel all settings.

•After making settings, touch BACK . The position will be saved and the system will return to the previous operation screen.

Touch switch	Function	Touch switch	Function
	Acoustics optimized for		Acoustics optimized for
	driver's seat		both front seats
	Acoustics optimized for		Acoustics optimized for
	passenger's seat		rear seats

•This setting cannot be done at the same time as adjustment of the volume balance (see next page).

•This product is configured for vehicles with a left-side driver's position.

28