How to operate the DVD player

How to use the DVD player

Changing video output

Touch VIDEO OUT on the SETUP screen.

Each time VIDEO OUT is pressed, the screen size will be changed in the order shown below.

16:9

4:3

4:3

 

letter box

 

pan & scan

 

 

Touch ENTER .

16:9

The video is displayed in normal wide size. DVD software recorded in 4:3 size will be displayed with black left and right edges or will be expanded to the left and right.

4:3 (letter box)

The video is displayed with black upper and lower edges.

DVD software recorded in 4:3 size will be displayed exactly at screen size (4:3).

4:3 (pan & scan)

The video is displayed with right and left edges cut off. DVD software recorded in 4:3 size will be displayed exactly at screen size (4:3).

When another monitor such as the rear seat monitor is being used, the size of the video being displayed in the rear seat monitor will differ according to the video output size that is set by the deck (front).

Viewing of wide screen modes is permitted when limited to the personal entertainment of the user, but caution is needed because using technologies such as image compression and expansion for the purpose of commercial benefit or public presentation may infringe upon the rights of the copyright holder being protected by applicable copyright law.

88

Page 89
Image 89
Eclipse - Fujitsu Ten AVN 30D manual Changing video output,  Touch Video OUT on the Setup screen