How to operate the VTR
How to use the VTR
Connecting a VTR deck enables watching of video tapes. Videos can be played only if the vehicle is completely stopped in a safe location with the parking brake set and the ignition switch turned to ON or ACC. (Only sound can be heard if a VTR is played while the car is in motion.)
Power button
CONT button
SOURCE button
Viewing the VTR
Press (AUDIO) SOURCE .
Touch VTR .
• The VTR screen will be displayed.
• Press CONT or touch the screen to display the VTR operation screen.
Turning off the VTR mode
Press PWR .
•Pressing PWR again will start playing
•Video can also be played by pressing (AUDIO) SOURCE and touching VTR .
•A video tape can be watched when VTR deck is connected to this unit with the optional connecting cord.
•After switching to the VTR operation screen, touch switches will be displayed for about 6 seconds. Pressing CONT will display them again.
•The VTR operation screen will be displayed by touching the screen, even when the VTR is playing.
•Depending on the kind of devices connected, the video image may not be displayed correctly.
90
