Adjusting volume balance
The set position for
Touch BAL FAD on the
POSITION setting screen to display the volume balance adjustment screen.
Touch the screen at the preferred balance point.
•To make fine adjustments, touch , , , .
•Touching CENTER will set the volume balance to the center position.
•After making settings, touch BACK .
•The set volume balance will be saved and the system will return to the previous operation screen.
•To set the position again, touch POS and repeat the steps above.
•Adjustments to volume balance and position are saved separately. Activating each position and then displaying volume balance adjustment screen will show the volume balance for each position.
•This setting cannot be done at the same time as POS (position selector) adjustment, described on the previous page.
•Touching and holding , , or while making fine adjustments will adjust values in a continuous action. However, adjustment will lock when it
reaches the center value, and , , or must be pressed again to continue adjustment.
Basic operation
29