About AUTO.P
Because AUTO.P temporarily saves stations for the preset switches, stations saved manually will remain in memory even if AUTO.P is used. By manually saving stations that are used regularly, these manually saved stations can be restored even after AUTO.P has been used, such as after traveling.
Touching AUTO.P while AUTO.P is being used or after AUTO.P has been used will return the preset memories back to the condition they had before AUTO.P was used. (Doing so will delete the stations saved with AUTO.P.) The flow for switching from AUTO.P to manual is shown below.
RADIO
Touch AUTO.P until a beep is heard.
Manual
Touch AUTO.P
(Stations saved by AUTO.P are deleted)
AUTO.P
(starts search)
AUTO.P
(stops search)
Automatically saves stations to preset switches
•AUTO.P may not automatically receive stations if radio waves in the surrounding area are weak.
•A station saved by the tuning switch may not match a station saved by AUTO.P even though the signal is received from the same station.
•Due to conditions for receiving radio waves, saved stations may differ even when the AUTO.P switch is operated repeatedly in the same location.
•Up to six stations having good reception sensitivity are automatically saved in order starting from the lowest frequency.
•When less than six stations capable of reception are found, nothing is saved for the remaining preset switches.
41
