M a i n t e n a n c e | & | T r o u b l e s h o o t i n g |
|
|
|
WARNING: Do not drop the lamp module or touch the glass bulb! The glass may shatter and cause injury.
FIGURE 30
Removing the lamp module
7Align the new lamp module in the correct direction.
8Gently push the module in as far as it goes.
9Tighten the screws on the outside of the module.
10Reposition the lamp door.
11Tighten the lamp door screw.
12Plug in the power cord and turn the projector back on. The lamp monitor light and lamp hour counter in the Status menu are automatically reset.
40