InFocus LP755 manual Safety Instructions, Safety Definitions Safety Terms

Page 7

SAFETY INSTRUCTIONS

Please read and follow all safety instructions provided BEFORE using your new projector. Failure to comply with safety instruc- tions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by equipment. Please save all safety instructions.

Safety Definitions:

•Warning: Statements identify conditions or practices that could result in permanent personal injury.

•Caution: Statements identify conditions or practices that could result in damage to your equipment.

Safety Terms:

•Warning: Don’t look directly into the lens when the projector is turned on.

•Warning: Don’t block ventilation openings.

•Warning: To replace the lamp, turn the power off and unplug the power cord. To avoid burns, wait 30 minutes

before opening the lamp door. Follow all instructions provided in this User’s Guide.

•Warning: Please use the power cord provided. Connect the power cord to a receptacle with a protective safety

(earth) ground terminal.

•Warning: Visible laser radiation. Do not stare into beam.

•Warning: Refer all service to qualified service personnel. Ser- vicing your own projector will void the warranty. See the fol- lowing page for the customer service contact information.

•Caution: Don’t set liquids on the projector. Spilled liquids may damage your projector.

•Caution: Don’t place the projector on a hot surface or in direct sunlight.

•Caution: Do not drop the projector. Transport the projector in an InFocus-approved case; see page 52 for a list of cases.

iii

Image 7

Contents I D E Page EN 55022 Warning Safety CertificationsRemote Control Warning FCC Warning DOC CanadaAustralian Certification C-tick mark Trademarks Declaration of ConformityTable of Contents Appendix Maintenance & TroubleshootingIndex Safety Definitions Safety Terms Safety InstructionsCustomer Service Safety SymbolsT R O D U C T I O N Unpacking the Projector Image ResolutionIntroduction CompatibilityT r o d u c t i o n Usage Guidelines If You Need Assistance WarrantySetting UP Projector Setting UP the Projector Connecting the CableWizard3 to the Projector Equipment you want to connect Preparing to Connect Your Equipment to the ProjectorDo you want to play your computer’s audio on the projector? Connecting a Laptop ComputerAudio cable Mouse cable Connecting a Desktop Computer Audio cable Mouse cable Monitor cable Connecting a Computer Using a Vesa cable Audio/video cable Connecting a Video PlayerVideo cable Cable Powering up the Projector and Adjusting the Image Connecting an External SpeakerTurning Off the Projector Using Projector Basic Image Adjustment Using the ProjectorUsing the Remote Control I n g O j e c t o r Adjusting the Projector Adjusting the height of the projector Using the Keypad and Remote Buttons Help keypad only Brightness + orComputer FreezeVideo PowerVolume + or StandbyUsing the On-Screen Menus Tint Display MenuBrightness ContrastBlank Screen Color TemperatureReset All ColorBass VolumeAudio Menu TrebleFade BalanceManual Sync Image MenuAuto Image Auto ResizeZoom Manual TrackingHorizontal position Vertical positionVideo Standard Controls MenuStandby Time Auto Source Select Default SourceCeiling Projection Rear ProjectionDocument Camera Display MessagesDisplay Startup Screen Auto startupStatus Menu Language MenuHelp menu Page I N T E N a N C E Troubleshooting Cleaning the Lens Maintenance & TroubleshootingCleaning the Fan Intake Filter I n t e n a n c e Troubleshooting Replacing the Projection Lamp Removing the lamp module Using the Security Lock Replacing the Batteries in the Remote ControlTroubleshooting Problem The screen resolution is not right Solutions to Common ProblemsProblem Nothing on projection screen Problem Color or text not being projectedProblem Only the start-up screen displays Problem Image and menus are upside down Problem Image is too wide or narrow for screenProblem Image is out of focus Problem Image and menus are reversed left to rightProblem Remote not operating correctly Problem Image is noisy or streakedProblem Lamp seems to be getting dimmer Problem Lamp shuts offPage Page P E N D I Appendix SpecificationsCableWizard Audio Input Video Audio InputAudio Output Standard Accessories Ship with the projector Part Number AccessoriesHW-RF-GPRO Optional AccessoriesKey command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F8 CRT/LCD FN-D NCR FN-F6 Using SimulScan Using Video Mirroring with a PowerBook ComputerProjected Image Size Maximum Distance to Diagonal Width Height Distance to Diagonal Width HeightD E Index D e Page D e Limited Warranty Limitation of Liability