InFocus LP420 warranty Video cable Cable

S e t t i n g u p t h e P r o j e c t o r

CAUTION: Your video player may also have a “Video Out” port for a coaxial cable connection. DO NOT use this to connect to the projector.

S-video cable

A/V cable

FIGURE 8

Connecting the projector to a video player using an S-video cable and the audio con- nectors on the standard A/V cable

4Plug the A/V cable’s white connector into the left “audio out” port on your video player. Plug the cable’s red connector into the right “audio out” port on the video player (Figure 7 and Figure 8).

•If you’re using an S-video cable, the yellow connectors on the A/V cable remain unused (Figure 8).

5Plug the A/V cable’s other white and red connectors to the left and right “audio in” ports on the projector.

The projector is compatible with these major broadcast video standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, and SECAM. It automatically adjusts to optimize its performance for the incoming video. The input signals for SECAM, PAL-M, and PAL-N video are similar to other video signals and cannot be automatically detected, therefore they must be chosen manually. See “Video Standard” on page 22 for details.

10