InFocus LP420 warranty Powering up the Projector and Adjusting the Image

Page 15

Powering up the Projector and Adjusting the Image

1Remove the lens cap.

2Plug the power cord into the side of the projector, then plug it into your electrical outlet. A surge-protected power strip is recommended if power surges are common in your area.

3Turn on the projector.

•The In Focus startup screen displays and the Power LED on top of the projector lights.

4If you connected a video player, turn it on.

•The video image should display on the projection screen. If a computer source is active, press the source button on the keypad (page 15) to display your video image. You can select a default source to determine which source the pro- jector examines first during power-up for active video; see “Default Source” on page 23.

•Use the volume buttons to adjust the volume.

5Turn on your computer.

•The computer image should display on the projection screen. (If a video source is active, press the source button to display your computer’s image.)

•If necessary, make adjustments to the image from the pro- jector’s on-screen menus. To open the menus, press the menu button on the keypad, then select the Display or Image menu. For more information about the menus, see page 16.

NOTE: Always use the power cord that shipped with the projector.

NOTE: With some computers, the order in which you power up the equipment is very important. Most computers should be turned on last, after all other peripherals have been turned on. Refer to your computer’s documentation to determine the correct order.

11

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Table of Contents Index AppendixDo Not Look Into The Lens Safety SummaryF e t y M m a r y Unpacking the Projector Image ResolutionIntroduction CompatibilityT r o d u c t i o n Usage Guidelines If You Need Assistance WarrantySetting UP the Projector T t i n g O j e c t o r Connecting an IBM-Compatible Computer Connecting a Macintosh Computer Audio/video cable Connecting a Video PlayerVideo cable Cable Powering up the Projector and Adjusting the Image Turning Off the Projector Using the Projector Basic Image AdjustmentAdjusting the Projector I n g O j e c t o r Using the Keypad Buttons Using the On-Screen Menus Display Menu Functions Color Audio Menu Functions Image Menu Functions Manual Tracking, Horiz. Posi Controls Menu Functions Rear Projection Maintenance & Troubleshooting Cleaning the LensReplacing the Projection Lamp Pull the lamp door up and remove it Remove the module Figure Using the Kensington Lock Problem Image isn’t centered on the screen Troubleshooting Problem Nothing on projection screenProblem Color or text not being projected Problem The screen resolution is not rightProblem Image is too wide or narrow for screen Problem Image is noisy or streaked Problem Image is out of focusProblem Image and menus are reversed left to right Problem no soundProblem Lamp shuts off Problem Lamp seems to be getting dimmerAppendix SpecificationsP e n d i Standard Accessories Ship with the projector Part Number AccessoriesOptional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F1 FN-F2 FN-F1 FN-F7 FN-F5 Using Video Mirroring with a PowerBook Computer Distance to Diagonal Width Height Projected Image SizeIndex D e
Top Page Image Contents