InFocus LP810 manual Computer Input Automatic MULTI-SCAN System, Auto PC Adjustment

Page 23

COMPUTER INPUT

AUTOMATIC MULTI-SCAN SYSTEM

This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 26). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. (Some computers need setting manually.)

Note : Projector may display one of following messages.

Auto

When projector cannot recognize connected signal as PC PC SYSTEM MENU

system provided in this projector, Auto PC Adjustment

 

 

 

function operates to adjust projector and message “Auto”

 

is displayed on SYSTEM Menu icon.

 

When image is not provided properly, manual adjustment

 

is required. (Refer to P24 and 25.)

––––There is no signal input from computer. Make sure connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 40.)

D-VGA, D-SVGA or D-XGA

When digital computer signal is received on DVI terminal, above message is displayed on PC SYSTEM Menu icon.

PC SYSTEM Menu icon Displays system being selected.

E

SELECT COMPUTER SYSTEM MANUALLY

This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually.

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT buttons to move a red frame pointer to PC

 

SYSTEM Menu icon.

2

Press POINT DOWN button to move a red arrow pointer to

 

system that you want to set, and then press SELECT button.

PC SYSTEM MENU

PC SYSTEM Menu icon

Displays system being selected.

Systems on this dialog box can be selected.

Custom Mode (1~5) set in PC

ADJUST Menu. (P24, 25)

PC ADJUSTMENT

AUTO PC ADJUSTMENT

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows.

 

Auto PC Adj.

 

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to PC

 

ADJUST Menu icon.

2

Press POINT DOWN button to move a red frame pointer to

AUTO PC Adj. icon and then press SELECT button twice.

This Auto PC Adjustment can be also executed by pressing AUTO PC ADJ. button on Remote Control Unit.

Store adjustment parameters.

Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, setting can be done just by selecting Mode in PC SYSTEM Menu (P23). Refer to step 3 of MANUAL PC ADJUSTMENT section (P25).

NOTE

PC ADJUST MENU

PC ADJUST Menu icon

Move a red frame pointer to AUTO PC

Adj. icon and press SELECT button.

Fine sync, Total dots and Picture Position of some computers can not be fully adjusted with this Auto PC Adjustment function. When image is not provided properly through this function, manual adjustments are required. (Refer to page 24, 25.)

Auto PC Adjustment function cannot be operated in Digital Signal input on DVI terminal and “RGB”, “720p (HDTV)”, “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu.

23

Image 23
Contents LP810 To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Component Video Features and DesignComputers Color SystemsName of Each Part of Projector Preparation200 240 V AC SETTING-UP ProjectorConnecting AC Power Cord For U.S.A. and Canada For Continental EuropeRoom Light Preparation Positioning ProjectorMoving Projector Preparation Adjustable FeetBNC Input Jacks Connecting ProjectorUSB Connector Series B Terminals of ProjectorTerminals A Projector Connecting to ComputerConnecting to Video Equipment Laser Pointer Function Operation of Remote ControlBefore Operation Focus Button Volume ButtonWired Remote Jack Zoom ButtonPoint Volume + / Buttons TOP Controls and IndicatorsFlow of ON-SCREEN Menu Operation HOW to Operate ON-SCREEN MenuOperating ON-SCREEN Menu Sound Menu Before Operation Menu BARGuide Window Turning OFF Projector Turning on / OFF ProjectorTurning on Projector Basic Operation Adjusting ScreenKeystone Adjustment Sound Adjustment Input Menu Computer InputSelecting Input Source Selecting Computer SystemAuto PC AdjustmentAuto PC Adjustment Computer Input Automatic MULTI-SCAN SystemComputer Input Manual PC Adjustment Full screen Computer InputDisplay area Display area H1024 x 48.363 60.004 Computer Input Compatible Computer SpecificationsResolution 640 x 31.469 59.940Image 1~4 Picture Image AdjustmentsImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentSource Select Menu Video Video InputVideo Pb/Cb,Pr/CrPAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-N Component Video Signal FormatSelecting Video System Video InputImage button Standard Cinema CinemaVideo Input Image Level Adjustment Closes Image Menu Reset Reset all adjustment to previous figure QuitSetting Menu SettingSetting Menu To change code of Projector To change code of Remote Control UnitWireless Mouse mode Projector modeOperating Wireless Mouse SETTING/APPENDIXOperating Wireless Mouse InstallationCleaning Projection Lens MaintenanceAIR Filter Care and Cleaning Lamp Replace Counter Appendix Lamp ReplacementTroubleshooting Function does not Remote Control UnitWireless Mouse Does not workTechnical Specifications USB Connector Series B Appendix Configurations of TerminalsWarranty Limitation and Exclusion Limitation of Liability 11/2002 610 304 0035 1AA6P1P3748-- PK3F

LP810 specifications

The InFocus LP810 is a high-performance projector designed to meet the demands of professional presentations, educational settings, and corporate use. Renowned for its exceptional image quality and advanced features, the LP810 makes it an ideal choice for those who value clarity and detail in visual presentations.

One of the standout features of the InFocus LP810 is its impressive brightness, rated at 3500 ANSI lumens. This ensures that it performs well in various lighting conditions, providing vivid and bright images that capture the audience's attention, even in well-lit rooms. Coupled with a high contrast ratio of 2000:1, the projector delivers deep blacks and vibrant colors, making it perfect for displaying everything from detailed presentations to dynamic videos.

The LP810 employs DLP technology, which is known for its reliability and longevity. DLP projectors are less susceptible to color decay, ensuring that the images remain consistent over time. The InFocus LP810 also features a native XGA resolution of 1024 x 768 pixels, allowing for sharp image quality that enhances the clarity of text and graphics. Moreover, it supports various resolutions up to 1080p, making it versatile for different content formats.

Connectivity is a vital aspect of any projectors, and the InFocus LP810 does not disappoint. It offers multiple input options, including HDMI, VGA, and composite, accommodating various devices such as laptops, Blu-ray players, and gaming consoles. Additionally, the projector supports an RS-232 port for advanced integration into control systems, making it suitable for installation in larger venues.

Portability is another characteristic of the LP810, with a compact design that weighs approximately 5.5 pounds. This lightweight design facilitates easy transportation, making it a great choice for professionals who need to present in different locations. The projector also includes onboard controls, allowing users to make quick adjustments without needing a remote.

In terms of usability, the LP810 features an intuitive menu system that simplifies navigation, alongside an automatic keystone correction that ensures the image remains properly aligned, regardless of the projector's positioning. The inclusion of an Eco mode extends the life of the lamp while also reducing energy consumption, which is an added benefit for environmentally conscious users.

In summary, the InFocus LP810 is a versatile and powerful projector that combines advanced technology with user-friendly features. Its high brightness, exceptional image quality, and extensive connectivity options make it an excellent choice for any professional or educational setting. Whether you're delivering a crucial business presentation or engaging a classroom full of students, the LP810 ensures that your visuals stand out.