InFocus LP810 manual Video Input Image Level Adjustment

Page 33

VIDEO INPUT

IMAGE LEVEL ADJUSTMENT

1

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button(s) to move a red frame pointer to

 

IMAGE ADJUST Menu icon.

2

Press POINT DOWN button to move a red frame pointer to item

that you want to adjust and then press SELECT button. Level of

IMAGE ADJUST MENU

Move a red frame pointer to

IMAGE ADJUST Menu icon

each item is displayed. Adjust each level by pressing POINT LEFT/RIGHT button(s).

Contrast

Press POINT LEFT button to decrease contrast, and POINT RIGHT button to increase contrast. (From 0 to 63.)

Brightness

Press POINT LEFT button to adjust image darker, and POINT RIGHT button to adjust brighter. (From 0 to 63.)

Color

Press POINT LEFT button to lighten color, and POINT RIGHT button to deeper color. (From 0 to 63.)

Tint

Press POINT LEFT button or POINT RIGHT button to obtain proper color. (From 0 to 63.)

White balance (Red)

Press POINT LEFT button to lighten red tone and POINT RIGHT button to deeper tone. (From 0 to 63.)

White balance (Green)

Press POINT LEFT button to lighten green tone and POINT RIGHT button to deeper tone. (From 0 to 63.)

White balance (Blue)

Press POINT LEFT button to lighten blue tone and POINT RIGHT button to deeper tone. (From 0 to 63.)

Sharpness

Press POINT LEFT button to soften image, and POINT RIGHT button to sharpen image. (From 0 to 15.)

Gamma

Press either POINT LEFT button or POINT RIGHT button to obtain better balance of contrast. (From 0 to 15.)

Noise reduction

Press POINT LEFT/RIGHT button(s) to change noise reduction mode. Dialog box display is changed to “On” to reduce noise (rough parts) of image. Press POINT LEFT/RIGHT button(s) again, to change noise reduction mode to off.

Progressive scan

Press POINT LEFT/RIGHT button(s) to change progressive scan mode. Dialog box display is changed to “Off” and progressive scan mode to off. Press POINT LEFT/RIGHT button(s) again, progressive scan mode to on.

item to be selected and then press SELECT button.

E

Press POINT LEFT/RIGHT buttons to adjust value.

Press SELECT button at this icon to display other items.

Press SELECT button at this icon to display previous items.

Press POINT LEFT/RIGHT buttons to adjust value.

Press SELECT button at this icon to store value.

NOTE :

Tint cannot be adjusted when video system is PAL, SECAM, PAL-M or PAL-N.

Noise Reduction cannot be operated when video signal types and systems as follow.

●Composite video signal (SECAM, NTSC4.43, PAL-M and PAL-N systems).

●S-video signal (SECAM, PAL-M and PAL-N systems).

●Component video signal.

Progressive cannot be operated when “480p”, “575p”, “720p”, “1035i” or “1080i” is selected on AV SYSTEM MENU (P31).

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents LP810 To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Computers Features and DesignColor Systems Component VideoName of Each Part of Projector PreparationConnecting AC Power Cord SETTING-UP ProjectorFor U.S.A. and Canada For Continental Europe 200 240 V ACRoom Light Preparation Positioning ProjectorMoving Projector Preparation Adjustable FeetUSB Connector Series B Connecting ProjectorTerminals of Projector BNC Input JacksTerminals A Projector Connecting to ComputerConnecting to Video Equipment Operation of Remote Control Before OperationLaser Pointer Function Wired Remote Jack Volume ButtonZoom Button Focus ButtonPoint Volume + / Buttons TOP Controls and IndicatorsHOW to Operate ON-SCREEN Menu Operating ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Guide WindowSound Menu Turning on / OFF Projector Turning on ProjectorTurning OFF Projector Adjusting Screen Keystone AdjustmentBasic Operation Sound Adjustment Selecting Input Source Computer InputSelecting Computer System Input MenuAuto PC Adjustment PC AdjustmentComputer Input Automatic MULTI-SCAN System AutoComputer Input Manual PC Adjustment Display area Computer InputDisplay area H Full screenResolution Computer Input Compatible Computer Specifications640 x 31.469 59.940 1024 x 48.363 60.004Image Level Select Direct Picture Image AdjustmentsImage Level Select Menu Image 1~4Image Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputPb/Cb,Pr/Cr Source Select Menu VideoSelecting Video System Component Video Signal FormatVideo Input PAL / Secam / Ntsc / NTSC4.43 / PAL-M / PAL-NImage button Standard Cinema CinemaVideo Input Image Level Adjustment Closes Image Menu Reset Reset all adjustment to previous figure QuitSetting Setting MenuSetting Menu Wireless Mouse mode To change code of Remote Control UnitProjector mode To change code of ProjectorOperating Wireless Mouse SETTING/APPENDIXInstallation Operating Wireless MouseMaintenance AIR Filter Care and CleaningCleaning Projection Lens Lamp Replace Counter Appendix Lamp ReplacementTroubleshooting Wireless Mouse Remote Control UnitDoes not work Function does notTechnical Specifications USB Connector Series B Appendix Configurations of TerminalsWarranty Limitation and Exclusion Limitation of Liability 11/2002 610 304 0035 1AA6P1P3748-- PK3F

LP810 specifications

The InFocus LP810 is a high-performance projector designed to meet the demands of professional presentations, educational settings, and corporate use. Renowned for its exceptional image quality and advanced features, the LP810 makes it an ideal choice for those who value clarity and detail in visual presentations.

One of the standout features of the InFocus LP810 is its impressive brightness, rated at 3500 ANSI lumens. This ensures that it performs well in various lighting conditions, providing vivid and bright images that capture the audience's attention, even in well-lit rooms. Coupled with a high contrast ratio of 2000:1, the projector delivers deep blacks and vibrant colors, making it perfect for displaying everything from detailed presentations to dynamic videos.

The LP810 employs DLP technology, which is known for its reliability and longevity. DLP projectors are less susceptible to color decay, ensuring that the images remain consistent over time. The InFocus LP810 also features a native XGA resolution of 1024 x 768 pixels, allowing for sharp image quality that enhances the clarity of text and graphics. Moreover, it supports various resolutions up to 1080p, making it versatile for different content formats.

Connectivity is a vital aspect of any projectors, and the InFocus LP810 does not disappoint. It offers multiple input options, including HDMI, VGA, and composite, accommodating various devices such as laptops, Blu-ray players, and gaming consoles. Additionally, the projector supports an RS-232 port for advanced integration into control systems, making it suitable for installation in larger venues.

Portability is another characteristic of the LP810, with a compact design that weighs approximately 5.5 pounds. This lightweight design facilitates easy transportation, making it a great choice for professionals who need to present in different locations. The projector also includes onboard controls, allowing users to make quick adjustments without needing a remote.

In terms of usability, the LP810 features an intuitive menu system that simplifies navigation, alongside an automatic keystone correction that ensures the image remains properly aligned, regardless of the projector's positioning. The inclusion of an Eco mode extends the life of the lamp while also reducing energy consumption, which is an added benefit for environmentally conscious users.

In summary, the InFocus LP810 is a versatile and powerful projector that combines advanced technology with user-friendly features. Its high brightness, exceptional image quality, and extensive connectivity options make it an excellent choice for any professional or educational setting. Whether you're delivering a crucial business presentation or engaging a classroom full of students, the LP810 ensures that your visuals stand out.
Top Page Image Contents