Onkyo CR-B8 Troubleshooting, Tuner, Press / to adjust radio frequency, Remote Controller

Page 52

CRB8.book 52 ページ ２００５年８月１８日 木曜日 午後６時４０分

Troubleshooting—Continued

The disc will not play.

•Make sure that the disc has been loaded on the disc tray correctly. The disc should be inserted with the playback side facing down.

•Check to see if the disc’s surface is dirty.

•If condensation is suspected, wait for about one hour after you turn on the power to the unit before playing the disc.

•The CD-R/RW disc is nonstandard. See “Disc Notes” on page 12.

It takes a long time until playback starts.

•It may take time for the CD receiver to load and read a CD that contains many tracks.

Tuner

Noise is heard during broadcast, or too much white noise is heard during an FM stereo broadcast. You cannot tune in the broadcast station using the Auto Preset function (for only FM stations). Or, the FM ST indicator does not light up during FM broadcast.

•Change the location of the antenna. (See page 37.)

•Locate the unit further from the TV or a computer.

•Cars or airplanes can create noisy interference.

•A broadcast radio signal may be weak if a concrete wall obstructs the signal path.

•Try setting FM mode to Monaural. (See page 38.)

•Noise may be heard when you operate the remote controller during AM reception.

•If nothing can improve the reception, install an outdoor antenna. (See page 15.)

If power outage occurs or the power plug is disconnected:

•Memory is normally retained for two weeks. If the programmed preset channels are lost, program them again.

•The clock data is lost. Set the clock and timers again.

Radio frequency is not adjustable.

•Press / to adjust radio frequency.

Remote Controller

The remote controller does not function correctly.

•Make sure that the batteries have been installed in the correct direction (polarity +/–). (See page 5.)

•Replace both batteries with new ones. (Do not mix different types of batteries or new and old batteries.)

•The distance between the remote controller and the unit may be too great, or there may be an object between them.

•The remote control sensor on the unit may be subjected to bright light (inverter fluorescent light or sunlight).

•The unit is placed behind the tinted windows of an audio rack or entertainment center.

Connection with External Devices

Interoperability with other external Onkyo devices is not available.

•Make sure that the cable and analog audio cables are connected correctly (See pages 17-20). Connecting only an

cable won’t work.

•Specify the source name in the display for the external Onkyo device. (See page 20.)

•If any Onkyo recording device is combined to allow MP3 dubbing on CD, recording will start without performing peak search when the CD DUBBING button is pressed on the connected recording device.

This is not a malfunction.

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents CR-B8 Important Safety Instructions AvisPower PrecautionsInstalling this Unit Supplied Accessories FeaturesPrecautions Installing the Batteries Before Using This UnitUsing the Remote Controller Table of Contents Table of Contents Part Names and Functions Front PanelPart Names and Functions DisplayRear Panel AM Antenna 14FM Antenna 14 LineRemote Controller Disc Notes CD receiver supports the following discsDisc Notes CDs contain tracksMP3 MP3 discs contain MP3 tracks organized into groupsConnecting Antenna Connecting the AM Loop AntennaConnecting the Indoor FM Antenna Attach the FM antenna, as shownConnecting Antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting the Speakers Connecting SpeakersPlacement Connecting External Devices Connecting a SubwooferAbout Connections Cables & JacksConnecting External Devices Connection for TV Audio SignalConnecting an Onkyo Stereo Cassette Tape Deck To output sound from TV, switch the input selector to LineConnecting an RI Dock Remote Interactive Dock Jack connection enables you to use the following functionsConnecting an Onkyo Compact Disc Recorder About the Optical Digital OUT ConnectorConnecting the Power Cord Listening through the Headphones Adjusting the VolumeUnderstanding Common Operations Turning the Unit On and StandbyAdjusting Bass Adjusting TrebleEmphasizing the Low End Using the Remote Controller Understanding Common OperationsSelecting the Track to Play Playing a CDLocating a Particular Point in a Track Changing the Display Information Playing a CDFor information on MP3 discs, see While playback is stopped, press Group for 2 seconds Selecting MP3 Tracks in Navigation ModePress Multi JOG Selecting MP3 Tracks in All Group Mode Selecting MP3 Tracks in 1-Group Mode Press YES/MODEVarious Ways to Play CDs Memory PlaybackTurn Multi JOG to select the first Track you want to play back, thenRandom Playback Various Ways to Play CDsRepeat/1 Track Repeat Playback Cancels Memory and Random modes Cancelling the Playback ModeCancels Repeat or 1 Track Repeat mode MP3 Preferences ItemsMP3 Preferences CD Extra? Audio/MP3Joliet? Use SVD/ISO9660 Trk/Grp Num? Display/Not DisplayProgramming FM/AM Stations One by One Preset Write Programming Radio StationsCustomizing the Preset Channels Programming Radio StationsProgramming FM Stations Automatically Auto Preset To improve the FM reception, adjust the antenna positionTo cancel auto presetting, press EDIT/ NO/CLEAR Press Input / to display FMAdjusting the Antenna Listening to an FM/AM StationManually Tuning a Broadcast Station Adjust the volume levelSelects a preset channel Listening to an FM/AM StationSwitching the Display Information Preset channel nameTips for Changing the Preset Channels Changing the FM/AM Preset ChannelsCopying a Preset Channel Preset Copy Erasing a Preset Channel Preset Erase Changing the FM/AM Preset ChannelsCall the preset channel you wish to erase Naming Preset Channels Naming a Preset ChannelEntering a Name Correcting and Erasing a CharacterNaming Preset Channels Erasing the Name Assigned to a Preset ChannelInputting Characters from the Remote Controller Inserting a CharacterTo Switch between the 12-hour and 24-hour Displays Setting the ClockChecking the Time and the Day of the Week About the Timers Using the Timer FunctionsAbout the Sleep Timer Using the Timer Functions Using the Sleep TimerCanceling Sleep Timer Checking the Remaining TimeProgramming a Timer Repeatedly press Timer to select the desired timer numberTurn Multi JOG to selectTimer Play or Timer Rec Turn Multi JOG to select the preset num- berTurn Multi JOG to select Once or Every Turn Multi JOG to select the days of the weekTurn Multi JOG to select the first day Turn Multi JOG to select the last dayTurn Multi JOG to set the On time of the timer operation Turn Multi JOG to set the Off time for the timer operationTurn Multi JOG to set the volume Place the unit in Standby modeSwitching the Timer On and Off Viewing the Timer SettingsPower TroubleshootingAudio Troubleshooting Press / to adjust radio frequencyRemote Controller TunerTimer Function Colors of the TV Picture BleedSpecifications GeneralAmplifier Section Tuner SectionMemo 3 4 4 0 9

CR-B8 specifications

The Onkyo CR-B8 is a compact and versatile all-in-one mini-system that embodies high-quality audio performance with modern connectivity options. Designed for music enthusiasts seeking a balance between size and sound, the CR-B8 delivers powerful audio in a space-saving design, making it a perfect addition to any room.

One of the standout features of the Onkyo CR-B8 is its robust amplification system. Equipped with a 20-watt per channel output, it ensures rich, dynamic sound that fills the room while maintaining clarity across different frequency ranges. Whether you are listening to classical melodies or modern pop hits, the audio fidelity remains impressive.

The CR-B8 incorporates advanced technologies to enhance the listening experience. It features a high-performance digital audio amplifier that reduces distortion and provides clean power, resulting in a more accurate sound reproduction. Additionally, the system is compatible with a wide range of audio formats, including CDs and FM radio, allowing users to enjoy their favorite music in various ways.

Connectivity options are abundant with the Onkyo CR-B8. It includes Bluetooth technology, enabling seamless streaming from smartphones, tablets, and other devices. This wireless feature makes it convenient to access personal music libraries or online streaming services without the hassle of cables. The unit also offers an auxiliary input, letting users connect external devices, such as MP3 players or laptops, for added versatility.

With a sleek and minimalist design, the Onkyo CR-B8 fits effortlessly into any décor. The front panel features an easy-to-read display and intuitive controls, making it user-friendly even for those who may not be as tech-savvy. The system also incorporates a built-in clock and timer function, adding practicality for daily use, especially in bedrooms or home offices.

The CR-B8 is designed with energy efficiency in mind, ensuring that it consumes minimal power without compromising audio quality. This feature aligns with eco-conscious consumer preferences and provides a budget-friendly solution for electric consumption.

Overall, the Onkyo CR-B8 stands out as a well-rounded mini-system that combines quality sound, modern features, and compact convenience. Whether you are a casual listener or a dedicated audiophile, the CR-B8 delivers an impressive audio experience that can be easily integrated into any lifestyle or living space. With a blend of style, performance, and technology, it is an excellent choice for anyone looking to enhance their music listening experience.
Top Page Image Contents