InFocus IN8606HD Appendix, Serial Communication, Setting, Value, Function, Command, Default, Step

IN8606HD User’s Manual

APPENDIX I

Serial Communication

The following table describes the serial communication configuration that should be used when interfacing to CLI via the serial port.

Windows HyperTerminal or ProComm are two tools that can be used to send CLI commands across the serial port.

	Setting	Value
	Bits per second	19200
	Data bits	8
	Parity	None
	Stop bits	1
	Flow control	None
	Emulation	VT100
No	Function	Command	RW	Min	Max	Default	Step		Parameter
1V	AC Power On	APO	RW	0	1	0	1	0:Disable; 1:Enable
	(Auto power on)
								0:Fill
								1:4:3
3V	Aspect Ratio	ARZ	RW	0	5	0	1	2:16:9
								3:Letterbox
								4:Native
								5:2.35:1
4V	Auto Image	AIM	W	n/a	1	1	1	1:Enable
								0:Never
								1~36 * 5 = ? min
5V	Auto Off Time	AOT	RW	0	36	6	1	1:5min
								6:30min (Default)
								36:180min
6V	Auto Source	ASC	RW	0	1	1	1	0:Disable; 1:Enable
7V	Blank Screen	BLK	RW	0	1	0	1	0:Disable; 1:Enable
9V	Brightness	BRT	RW	0	100	50	1	Valid only when Display
								Mode = User
								0:Front
11V	Projection	CEL	RW	0	3	0	1	1:Rear
	(Ceiling mode)							2:Ceiling
								3:Ceiling+Rear
12V	Closed Captions: Non-	CLC	RW	0	1	0	1	Off
	Muted							On (CC1)
14V	Color	CLR	RW	0	100	50	1	Video S-Video only = satu-
								ration
								Valid only when Display
15	Color Space	CSM	RW	0	2	0	1	Mode = User
								0:Auto
(None)
								1:RGB
								2:YUV

–52 –