InFocus IN8606HD manual Function, Command, Default, Step, Parameter, 4000

IN8606HD User’s Manual

No	Function	Command	RW	Min	Max	Default	Step	Parameter
								Valid only when Display
						Source		Mode = User
16V	Color Temp	TMP	RW	0	2		1	0:Warm
						Specific
								1:Normal
								2:Cold
17V	Contrast	CON	RW	0	100	50	1	Valid only when Display
								Mode = User
								0:VGA1
								5:HDMI-1
18V	Current Source	SRC	RW	0	13	0	1	6:HDMI-2
								10:Component
								12:Video
								13:S-Video
21V	Digital Zoom	DZM	RW	-10	10	0	1	-10~10
								0:No error
								1:Lamp not lit after 5 At-
								tempts
								3:Lamp went out unexpect-
27V	Error Condition	ERR	R	n/a	n/a	n/a	n/a	edly
								4:Fan failure
								5:Over- heating
								8:DMD error
								9:Color wheel
28V	Factory Reset	RST	W	n/a	1	1	1	1:reset
32V	Freeze Screen	FRZ	RW	0	1	0	1	0:Disable
								Valid only when Display
								Mode = User
								0:1.8
34V	Gamma	GTB	RW	0	5	Source	1	1:2.0
						Specific		2:2.2
								3:2.4
								4:B&W
								5:Linear
40V	Horz. Position	HPS	RW	x	x	0	1	RGB source only
								(HPS?) to get range
								Displays the number of
45V	Lamp Hours in High	LMO	R	0	9999			hours that the current lamp
	Power Mode							has run in High Power
								(Normal) mode.
								Displays the number of
46V	Lamp Hours in Low	LME	R	0	9999			hours that the current lamp
	Power Mode							has run in Low Power (Eco)
								mode.
47V	Lamp Life	LIF	R	n/a	4000			240W lamp life 4000
49V	Lamp Resets (Total	LMR	R	0	9999	0	1
	number)
62V	Lamp Low Power	IPM	RW	0	1	0	1	1=ECO, 0=Normal

– 53 –