Displaying a video image
Remove the lens cap. | remove lens cap |
|
Press the Power button on the top of the projector.
press Power
The LED flashes green and the Interactive Display illuminates and counts down the time to image display. When the lamp comes on, the startup screen is displayed and the LED is steady green. It can take a minute for the image to achieve full brightness.
? No startup screen? Get help on page 15.
Plug in and turn on the video device. | turn on video device |
source
? No video image? Try pressing the Source or Auto Image button on the keypad. Get help on page 15.
Adjust the height of the projector by pressing the release button to extend
the elevator foot.
adjust height
release button
Position the projector the desired distance from the screen at a 90 degree
angle to the screen. See page 38 for a table listing screen sizes and distancesadjust distance to the screen.
12