InFocus LP 120 manual Displaying a computer image

Page 9

Displaying a computer image

Remove the lens cap.

remove lens cap

 

Press the Power button on the top of the projector.

press Power

The LED flashes green and the Interactive Display illuminates and counts down the time to image display. When the lamp comes on, the startup screen is displayed and the LED is steady green. It can take a minute for the image to achieve full brightness.

?No startup screen? Get help on page 15. Turn on your computer.

 

turn on computer

The computer’s image should appear on the projection screen. If it doesn’t,

source

press the Source button on the projector’s keypad.

 

Make sure your laptop’s external video port is active.

 

Many laptops do not automatically turn on their external video port when a

activate laptop’s external port

 

projector is connected. Refer to your computer’s documentation to learn the

 

activation commands specific for your computer. For example, some lap-

 

tops use a key combination of FN + F5 to turn the external display on and

 

off.

 

? No computer image? Try pressing the Auto Image button on the keypad. Get help on page 16.

7

Image 9
Contents USER’S Guide Page $GREH$FUREDWSGI Declaration of Conformity Remote Control WarningTrademarks FCC WarningTable of Contents Page Introduction Projector components and featuresConnecting a computer Required computer connectionsOptional computer connections Displaying a computer image First-time projector use with Windows For Windows 2000, Windows ME, and Windows XP Wizard launches three timesAdjusting the image Connecting a video device Standard video connectionsOptional video connections ? No startup screen? Get help on Displaying a video imageAdjust keystone Troubleshooting your setup Shutting down the projectorLED behavior and meaning Only startup screen appears Startup screenRange Out Page Page Page Projected colors don’t match source ColorAdjust horizontal or vertical position PictureAdvanced menu Lamp won’t turn on, Interactive Display says Replace lampLamp must be replaced Lamp turns on Using the keypad buttons Troubleshooting the remote Using the remote controlTroubleshooting audio Using the audioOptimizing computer images Presentation featuresCustomizing the projector Optimizing video imagesUsing the menus Picture menu SettingsService menu Advanced menu System menu Settings menuScreen Save Language Cleaning the lens MaintenanceReplacing the projection lamp Page Standard Accessories Ship with the projector Part Number AccessoriesOptional Accessories Part Number AppendixRed LED behavior and projector errors Projected image sizeRed LED Behavior Explanation Blinking green 14 blinking red 20 solid red Page Warranty Limitation and Exclusion Limited WarrantyLimited Warranty Period To Be Eligible For Limited Warranty CoverageTo Obtain Warranty Service If YOU Need ASSISTANCE… USER’S Guide