Adjusting the image
Adjust the height of the projector, if necessary, by pressing the release but- | adjust height |
ton to extend the elevator foot. |
|
release button
Position the projector the desired distance from the screen at a 90 degree |
|
angle to the screen. | adjust distance |
See page 38 for a table listing screen sizes and distances. |
|
Adjust the zoom tab or the focus dial by rotating them until the desired |
|
image size and sharpness are produced. | adjust zoom and focus |
zoom | focus |
If the image is not square, adjust the keystone by using the buttons on the
keypad.
adjust keystone
Press the upper Keystone button to reduce the upper part of the image, and press the lower Keystone button to reduce the lower part.
Adjust the Contrast or Brightness in the Picture menu.
See page 27 for help with the menus.
adjust Contrast or Brightness
10