How to Hold the Wand
You can hold the wand the way you would hold a normal pencil or pen, or you can hold it like a remote control - use in whichever position is most comfortable. NOTE: If the wand is up close to the screen, you can press its tip against the projection surface to click and drag. Not recommended for use with fabric screens.
Using More than One Wand
Wand Features
Left mouse button
Scroll Wheel button
Link light
Sensor Tip
The projector can work with more than one wand, but you can only use one wand at a time. When you want to switch to a different wand:
1Point the current wand away from the projected image for at least 3 seconds.
2Press the tip, left or right button on the new wand to turn it on, and then start using the new wand.
NOTE: Settings in the projector's LiteBoard Wand menu (see below) apply to all wands used with that projector.
Right mouse button
Battery light
Undo button
USB connector
Reset button
Buttons and Wand Tip
The wand's three top buttons are equivalent to the left, right, and scroll wheel buttons on a mouse. The wand's tip is also a button, and is equivalent to the left mouse button.
NOTE: By default, the Scroll Wheel button changes wand motion between Auto, Normal and Draw. Auto switches between Draw, Normal and Stable mode depending on the image size and distance. Normal makes clicking easier, but Draw allows smoother motion. You can change the Scroll Wheel button to perform other functions, including a standard middle button mouse click (see LiteBoard Wand Menu below).
Battery Light
The amber battery light shows the status of the wand's
13