InFocus IN3916, IN3900, AA0021 manual Using the menus

Using the menus

To open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) Use the arrow buttons to move up and down to highlight the desired menu, then press the Select button.

keypad navigation buttons

To change a menu setting, highlight it, press Select, then use the up and down arrow buttons to adjust the value or select an option or turn the feature on or off. Press Select to confirm your changes. Use the arrows to navigate to another setting. When your adjustments are complete, press Menu to access a different menu; press the Menu button at any time to navigate to the higher-level menu and ultimately close the menus.

The menus are grouped by usage:

•The Basic Picture menu provides common image adjustments.

•The Advanced Picture menu provides more complex image adjustments.

•The Setup menu provides set-up type adjustments that are not changed often.

•The Status and Service menu provides information about the projector and source.

	Basic Picture
Brightness	50
Contrast	50
Sharpness	Maximum
Color	50
Tint	50
Auto Image...
Aspect Ratio	Auto

iApply Preset...

Basic Picture menu

		Setup
	Auto Source	On
	Power-up Source	VGA1
	USB Display Source	On
	Composite SCART	RGB
	Video Standard	Auto
	Closed Caption	Off
	Ceiling Mount	Off
i	Rear Project	Off

Setup menu

		Advanced Picture
	BrilliantColor™	Normal Look
	White Peaking	50
	Color Temp	Warmest
	Force Wide	Off
	Overscan	Off
	Phase	50
	Sync Threshold	50
i	Tracking	50

Advanced Picture menu

Status and Service

Source Info

Projector Info

LiteBoard™ Info

Reset Lamp Hours...

Factory Reset...

Service Code...

i

Status and Service menu

30