Picture menu
To adjust the following settings, highlight the setting, press Select, use the up and down arrows to adjust the values, then press Select to confirm the changes.
Keystone: adjusts the image vertically and makes a squarer image. Tilt the projector up or down to adjust for keystone before using the digital key- stone correction in the menu.
Image Shift (IN78 only): moves the image vertically. Use it to shift the image, or to mask artifacts or bars on the top or bottom of the image
Contrast: controls the degree of difference between the lightest and darkest parts of the picture.
Brightness: changes the intensity of the image.
Color: adjusts a video image from black and white to fully saturated color.
Tint: adjusts the
Aspect Ratio: Aspect ratio is the ratio of the image width to image height. TV screens are usually 4:3. HDTV and most DVDs are 16:9. The projector’s default is 16:9. See “Choosing the aspect ratio” on page 6 for more informa- tion.
Select Native to see the unmodified input with no resizing by the projector. Select 16:9 to watch enhanced widescreen DVDs. Select Letterbox to pre- serve the 16:9 aspect ratio. If you have a 16:9 source and screen, the image fills the screen. If your source is letterboxed, the image is expanded to fill the screen. Select Natural Wide to stretch a 4:3 image to fill the entire 16:9 screen. The center
For more information regarding Aspect Ratio, see page 6.
Picture menu
increasing keystone | decreasing keystone |
Aspect ratio
22