Marantz PD6140D manual Basic Operations

Page 18

Basic Operations

POWER

To turn the unit ON and OFF:

1.Plug the power cord into an active AC power outlet.

2.Press the Power button (on the unit).

The monitor’s POWER/STANDBY indicator turns red and the standby mode is set.

3.Press the POWER ON button (on the remote control) to turn on the unit.

The monitor’s POWER/STANDBY indicator will light up (green) when the unit is on.

4.Press the POWER STANDBY button (on the remote control) or the Power button (on the unit) to turn off the unit.

The monitor’s POWER/STANDBY indicator turns red and the standby mode is set (only when turning off the unit with the remote control).

VOLUME

To adjust the sound volume:

1.Press and hold the VOLUME button (on the remote control or the unit) to increase to the desired level.

2.Press and hold the VOLUMEbutton (on the remote control or the unit) to decrease to the desired level.

MUTE

To cancel the sound:

Press the MUTE button on the remote control to cancel the sound; press again to restore.

DISPLAY

To check the settings:

1.The screen changes each time the DISPLAY button is pressed.

2.If the button is not pressed for approximately three seconds, the menu turns off.

DIGITAL ZOOM

Digital zoom specifies the picture position and enlarges the picture.

1.Press the POINTER button to display the pointer. ()

To change the size of the picture:

Press the ZOOM+ button and enlarge the picture.

The pointer will change to resemble a magnifying

glass. ( )

A press of the ZOOM- button will reduce the picture and return it to its original size.

To change the picture position:

Select the position with the ▲▼   buttons.

2.Press the POINTER button to delete the pointer.

AUTO ADJUST

To adjust the size or quality of the picture automatically:

Press the AUTO ADJUST button.

Information

AUTO ADJUST ON setting

When RGB (still picture) input

is selected ...... Fine Picture, Picture ADJ, Position,

and Contrast will be adjusted automatically.

When RGB (motion picture),

VIDEO, or Y/Pb/Pr (component) input

is selected ...... The screen size switches to ZOOM

mode automatically with the superimposed caption displayed fully only when the picture contains dark areas above and below the picture.

11

Image 18
Contents Model PD6140D User Guide Introduction Features you’ll enjoy includeContents of the Package Introduction to the Plasma MonitorPrecautions Important InformationRisk of Electric Shock Do not Open Plasma monitor cleaning procedure To avoid damage and prolong operating lifeRecommendations to avoid or minimize phosphor burn-in Mises en garde et précautions de sécurité Recommandations importantesPrécautions Risque D’ELECTROCUTIONMéthode de nettoyage du moniteur à plasma Contents How to Attach Options to the Plasma Monitor Ventilation Requirements for enclosure mountingPart Names and Function Turns the monitor’s power on and offReceives the signals from the remote control Front ViewRear View/ Terminal Board Connect the included power cord hereSyncronization signal Connect DVD’s, High Definition or Laser Discs, etc. hereRemote Control Not functional for the models covered in this manual Battery Installation and ReplacementTransmits the remote control signals Clears the number set by the ID Select buttonOperating Range Using the wired remote control modeHandling the remote control Approx 7m/23ftInstallation Digital signal outputPersonal computer with a Connecting Your DVD Player Connecting Your Document CameraConnecting Your VCR or Laser Disc Player Connections with Equipment that have a Digital InterfacePin Assignments and Signal Levels for 15 pin RGB Analog Pin No Signal AnalogCreating a video wall Cable ManagementBasic Operations After the power is turned off with the off timer To set the off timerTo cancel the off timer To check the remaining timeWhen viewing videos or digital video discs Wide Operations Supported resolution Wide Screen Operation with Computer SignalsWhen Picture Size is set to OFF  Picture Size setting Advanced menu mode Menu OperationsReset Menu TreeOnly when Auto Picture is OFF RGB/PC only Picture Settings Menu Adjusting the pictureSetting the color temperature Adjusting the color to the desired levelReducing noise in the picture  Gamma settings Making the Low Tone adjustments Adjusting the white balance  LOW Tone settings Color Tune settings Audio Settings MenuAdjusting the colors  Audio settings menuAdjusting the Position, Size, Fine Picture, Picture Adj Image Adjust Settings MenuSetting the allocation of the audio connectors Example Setting Audio INPUT1 to VideoOption1 Settings Menu Setting the on-screen menuSetting a computer image to the correct RGB select screen Setting the BNC connectorsChecking the signal being transmitted to RGB1 terminal  OSM Orbiter settings Input Skip settings Setting high definition images to the suitable screen sizeSetting the Input Skip  RGB Select modesOption2 Settings Menu Resetting to the default valuesSetting the power management for computer images PLE settings POWER/STANDBY indicatorSetting the picture to suit the movie Reducing burn-in of the screenOrbiter settings Orbiter Function settingsInverse Settings Setting the time To select on for the Working TimeScreen Wiper Setting the gray level for the sides of the screen Setting the screen size for S1/S2 video inputSoft Focus settings Gray Level settingsS1/S2 settings Setting the picture size for RGB input signalsSetting the signal and black level for DVI signal PLUG/PLAY settingsPresent Time settings Option3 Settings MenuUsing the timer Present TimeTo reset the data Setting the power on modeTo reset the program Special characters in the Program Timer screenControl Lock settings Enabling/disabling remote control wireless transmissionPWR. on Mode settings IR Remote settingsLoop Out setting ID number settingVideo Wall Position settings Video Wall settingDivider settings ScreensAuto ID settings DISP. Mode settingsImage Adjust settings PLE Link settings On Delay Power on delayOn Delay settings PLE LinkRepeat Timer Advanced OSM Settings MenuSetting the menu mode Repeat Timer settingsSetting the language for the menus Language Settings MenuColor System Settings Menu Setting the video signal formatConnections External ControlApplication Communication ParametersTroubleshooting Symptom Checks RemedyPage Page Model PD6140D Information Important Safety Instructions PD6140D Précautions Importantes DE Sécurité PD6140D DVI cable not supplied Band Avertissement DOC avis de conformationRemarque Specifications RGBDVD/HD/DTV Computer input signals supported by this system Table of Signals SupportedSupported resolution RGB DVIDeclaration of Conformity Is a registered trademark Japan