Marantz PD6140D manual Changing the Gamma Curve, Making the Low Tone adjustments,  Gamma settings

Page 27

6. Adjust the white balance using the  and  buttons.

GAIN RED

*If neither the  or  button is pressed within 5 seconds, the current setting is set and the previous screen reappears.

Information

Adjusting the white balance

GAIN R/G/B ..... White balance adjustment for signal

level

BIAS R/G/B ..... White balance adjustment for black

level

RESET ............ Resets settings to the factory default

values. Use  and  buttons to select “ON”, then press the MENU/ENTER button.

Restoring the factory default settings

Select “RESET” under the WHITE BALANCE menu.

Changing the Gamma Curve

This feature adjusts the brightness of the midtone areas while keeping shadows and highlights unchanged.

Example: Setting “3”

Set “ADVANCED OSM” to “ON” in the MAIN MENU (1/2), then perform the following operations.

1.On the MAIN MENU, select “PICTURE”, then press the MENU/ENTER button.

The “PICTURE” screen appears.

2.Use the and buttons to select “GAMMA”.

3.Use the  and  buttons to select “3”.

The mode switches as follows each time the  or  button is pressed:

1 2 3 4

 

 

 

 

PICTURE

 

2 / 2

 

 

PREVIOUS PAGE

 

 

 

COLOR TEMP.

 

:

MID

 

GAMMA

 

 

:

3

 

 

 

 

 

 

 

 

LOW TONE

 

:

AUTO

COLOR TUNE

 

 

 

 

 

 

SEL.

ADJ.

 

 

RETURN

 

 

 

EXIT

Information

GAMMA settings

The picture becomes darker as the number increases (in the sequence of 1, 2, 3, 4).

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

Making the Low Tone adjustments

This feature allows more detailed tone to be reproduced especially in the dark area.

Example: Setting “2”

Set “ADVANCED OSM” to “ON” in the MAIN MENU (1/2), then perform the following operations.

1.On the MAIN MENU, select “PICTURE”, then press the MENU/ENTER button.

The “PICTURE” screen appears.

2.Use the and buttons to select “LOW TONE”.

3.Use the  and  buttons to select “2”.

The mode switches as follows each time the  or  button is pressed:

AUTO 1 2 3

 

 

 

 

PICTURE

 

2 / 2

 

 

PREVIOUS PAGE

 

 

 

COLOR TEMP.

 

:

MID

GAMMA

 

:

2

 

 

LOW TONE

 

 

:

2

 

 

 

 

 

 

 

 

COLOR TUNE

 

 

 

 

 

 

SEL.

ADJ.

 

 

RETURN

 

 

 

EXIT

Information

LOW TONE settings

AUTO

Will automatically appraise the picture and

 

make adjustments.

1

Will apply the dither method suitable for

 

still pictures.

2

Will apply the dither method suitable for

 

motion pictures.

3

Will apply the error diffusion method.

Restoring the factory default settings

Select “ALL RESET” under the OPTION1 menu. Note that this also restores other settings to the factory defaults.

20

Image 27
Contents Model PD6140D User Guide Introduction to the Plasma Monitor Features you’ll enjoy includeContents of the Package IntroductionPrecautions Important InformationRisk of Electric Shock Do not Open Plasma monitor cleaning procedure To avoid damage and prolong operating lifeRecommendations to avoid or minimize phosphor burn-in Risque D’ELECTROCUTION Recommandations importantesPrécautions Mises en garde et précautions de sécuritéMéthode de nettoyage du moniteur à plasma Contents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma MonitorFront View Turns the monitor’s power on and offReceives the signals from the remote control Part Names and FunctionConnect DVD’s, High Definition or Laser Discs, etc. here Connect the included power cord hereSyncronization signal Rear View/ Terminal BoardRemote Control Clears the number set by the ID Select button Battery Installation and ReplacementTransmits the remote control signals Not functional for the models covered in this manualApprox 7m/23ft Using the wired remote control modeHandling the remote control Operating RangeInstallation Digital signal outputPersonal computer with a Connections with Equipment that have a Digital Interface Connecting Your Document CameraConnecting Your VCR or Laser Disc Player Connecting Your DVD PlayerPin No Signal Analog Pin Assignments and Signal Levels for 15 pin RGB AnalogCable Management Creating a video wallBasic Operations To check the remaining time To set the off timerTo cancel the off timer After the power is turned off with the off timerWide Operations When viewing videos or digital video discs Picture Size setting Wide Screen Operation with Computer SignalsWhen Picture Size is set to OFF  Supported resolutionMenu Operations  Advanced menu modeMenu Tree ResetOnly when Auto Picture is OFF RGB/PC only Adjusting the picture Picture Settings MenuSetting the color temperature Adjusting the color to the desired levelReducing noise in the picture  LOW Tone settings Making the Low Tone adjustments Adjusting the white balance  Gamma settings Audio settings menu Audio Settings MenuAdjusting the colors  Color Tune settingsExample Setting Audio INPUT1 to Video Image Adjust Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, Fine Picture, Picture AdjSetting the on-screen menu Option1 Settings Menu OSM Orbiter settings Setting the BNC connectorsChecking the signal being transmitted to RGB1 terminal Setting a computer image to the correct RGB select screen RGB Select modes Setting high definition images to the suitable screen sizeSetting the Input Skip  Input Skip settingsOption2 Settings Menu Resetting to the default valuesSetting the power management for computer images Reducing burn-in of the screen POWER/STANDBY indicatorSetting the picture to suit the movie PLE settingsOrbiter settings Orbiter Function settingsInverse Settings Setting the time To select on for the Working TimeScreen Wiper Gray Level settings Setting the screen size for S1/S2 video inputSoft Focus settings Setting the gray level for the sides of the screenPLUG/PLAY settings Setting the picture size for RGB input signalsSetting the signal and black level for DVI signal S1/S2 settingsPresent Time Option3 Settings MenuUsing the timer Present Time settingsSpecial characters in the Program Timer screen Setting the power on modeTo reset the program To reset the dataIR Remote settings Enabling/disabling remote control wireless transmissionPWR. on Mode settings Control Lock settingsID number setting Loop Out settingScreens Video Wall settingDivider settings Video Wall Position settingsAuto ID settings DISP. Mode settingsImage Adjust settings PLE Link On Delay Power on delayOn Delay settings PLE Link settingsRepeat Timer settings Advanced OSM Settings MenuSetting the menu mode Repeat TimerSetting the video signal format Language Settings MenuColor System Settings Menu Setting the language for the menusCommunication Parameters External ControlApplication ConnectionsSymptom Checks Remedy TroubleshootingPage Page Model PD6140D Information Important Safety Instructions PD6140D Précautions Importantes DE Sécurité PD6140D DVI cable not supplied Band Avertissement DOC avis de conformationRemarque Specifications RGBDVD/HD/DTV RGB DVI Table of Signals SupportedSupported resolution Computer input signals supported by this systemDeclaration of Conformity Japan Is a registered trademark