Low Battery Power Indicator

Bluetooth® Presenter

Installing the Batteries

•Please use the two AA batteries that are included.

•Install two AA batteries into the presenter with the correct polarity. Refer to the polarity signs inside the battery compartment.

•Slide the battery cover back into position

Bluetooth® Presenter

•Turn on the presenter by pressing the on/off switch located on the side.

• On - Press 3 seconds to turn on the presenter (LED blink once)

• Off - Press 3 seconds to turn off the presenter (LED blink twice)

NOTE: PLEASE REMOVE THE PROTECTIVE PLASTIC FILM ON THE TOUCH SCROLL BEFORE USING THE DEVICE.

NOTE: WHEN THE BATTERY POWER IS LOW, THE TOUCH SCROLL WILL FLASH RED. PLEASE REPLACE THE BATTERIES.

When 60 minutes of power remains, a red indicator light will glow for 8 seconds.

When only 30 minutes of power remains, the red indicator light will blink continuously.

NOTE: THE DEVICE WILL GO INTO SLEEP-MODE AFTER 60 MINUTES OF IN-ACTIVITY. TO RE-ACTIVATE, PRESS ANY KEY ON THE DEVICE AND WAIT 1 TO 4 SECONDS.