Programming the Buttons

Click onto the Targus logo to launch the device application.

Click to highlight the image of the device and then press “Setup Device” to launch the configuration software.

Click the arrows on the right-side of the drop down lists to configure each button.

NOTE: PLEASE SELECT THE CORRECT “PRESENTATION SOFTWARE” IN ORDER FOR THE PRESENTER KEYS TO FUNCTION PROPERLY.

Each button can be programmed to any of the following types of functions:

	Default Action	Set the buttons to a specific function.

	Run AppleScript	Set the buttons to load an AppleScript

	Launch Application	Set the buttons to launch specific application installed
	Launch Application	in the computer.
		in the computer.

	Perform key strokes	Set the button to recall key strokes.

	Predefined functions	Set the button to map pre-set actions

Close the application window to apply the changes.