Bluetooth® Presenter
Initial Configuration
Before you can begin using your Bluetooth presenter, you will first need to perform some initial setup steps.
NOTE: PLEASE USE THE LATEST BLUETOOTH DEVICE DRIVER. INSTRUCTION SCREENS MIGHT VARY DEPENDING ON THE VERSION OF YOUR BLUETOOTH DEVICE DRIVER.
Bluetooth Software: Mac
1.Go to the Bluetooth icon located on your desktop or in the system bar and click the icon to begin setup. Select “Turn Bluetooth On” to activate the Bluetooth function on your Mac.
2.Scroll down the list and select “Set up Bluetooth Device...”
Bluetooth® Presenter
3.Bluetooth Setup Assistant will begin. Please follow the
4.Select “mouse” and click continue to proceed with setup. Your presenter will need to be in “discovery” mode to connect. First, power on the presenter by pressing the “on/off” key for 3 seconds. Then, within 3 seconds after the power is on, press any button once (except “on/off” button) to enter into discovery mode. The LED in the Touch Scroll will blink continuously to indicate “discovery” mode is enabled.