Interlink electronic 7.1 manual Basic Server Administration

RAD-Series 7.1 Getting Started Guide

Basic Server Administration

Basic administration for AAA Servers can be done using the Server Manager Administration page.

You can run any of these commands on several servers at once. Just select all the servers to be included from the Status frame.

1Access the Server Manager.

2Choose Administration from the Navigation frame.

3In the Status frame, select the server(s) by checking the box.

Be sure to clear the box for any selected servers where you don’t want to run the command.

4In the Workspace frame, click the command to perform:

•Start—starts server operation after it’s been stopped. You’ll see a green GO icon next to the server name in the Status frame to indicate it’s online.

•Stop—stops server operation. You’ll see a red STOP icon next to the server name in the Status frame to indicate it’s offline.

•Restart—let’s you apply new configurations without having to first stop the server. First save the new configurations to push them to the server.

•Status—checks whether the server is responding. If it is, you’ll see the message “Server-name(Port-number)is responding.”

•Time—shows the date/time on remote servers.

Interlink Networks, Inc. Page 19