Interlink electronic 7.1 Basic Server Configuration, Load Configurations, Define Access Devices

Page 19

RAD-Series 7.1 Getting Started Guide

Basic Server Configuration

Before beginning server configuration, set up all your network devices, and list all shared secrets and device vendors. You’ll need this information to complete the server configuration.

To start configuring the AAA Server, access Server Manager.

To quit configuration at any time, just close your browser.

Load Configurations

Load the current server configurations into the Server Manager workspace. The initial download will contain the default wired configuration used to test the server installation.

1In the Navigation frame, click Load Configurations.

2In the Workspace frame, select the server to pull configurations from:

3Click Load.

You’ll be notified when the transfer is complete.

Define Access Devices

Enter the IP address and a shared secret for each access point in your network.

You can enter any valid IP address (e.g.: 192.44.3.11) or fully-qualified DNS name (e.g.: nas.yourcompany.com).

The shared secret is the code that will be used to establish a trust relationship between the access device and the server. The shared secret can’t exceed 255 characters or contain spaces.

1In the Navigation frame, click Define Access Devices.

2In the Workspace frame, click the New Access Device link or the Add button.

3In Name, enter the IP address or fully-qualified domain name.

4Enter and confirm the Shared Secret.

5The Vendor field specifies which set of vendor-specific attributes to return in RADIUS message sent to this device. Use CTRL + Click to select to select all that apply from the drop- down list. Choose Generic for none.

6Click Create.

Interlink Networks, Inc.

Page 15

Image 19
Contents RAD-Series AAA Server Getting Started Guide Trademark Information Table of Contents Technical Support Basic Server Administration LicensingNotational Conventions AudienceSystem Requirements PreparationCompatibility Upgrading Before InstallingAfter Installing Java Run-Time EnvironmentCertificates Installation Process InstallationYour options are Installing RAD-Series SoftwareRAD-Series 7.1 Getting Started Guide Directory Contains Installation DirectoriesStarting Server Manager Uninstalling RAD-Series SoftwareStopping Server Manager Starting Remote ControlAccessing Server Manager Changing the Server Manager PortStarting the Server Adding Servers to Server ManagerTesting Server Installation Configuration Process ConfigurationUsing Server Manager RAD-Series 7.1 Getting Started Guide Load Configurations Basic Server ConfigurationDefine Access Devices Define Local Realms Restarting the Server Save ConfigurationsSecuring the Server Where possible, store hashed passwords in user profiles Basic Server Administration Licensing Installing the LicenseOrdering a License Web Site Technical SupportHelp Desk