Interlink electronic 7.1 manual Configuration Process, Using Server Manager

Page 17

RAD-Series 7.1 Getting Started Guide

Configuration

The topics in this section will help you begin to set up the server for your network. After completing them, see the RAD-Series Administrator’s Guide to finish your server configuration.

Configuration Process

The basic configuration process is:

1Load existing configurations into Server Manager.

2Define network access devices.

3Define local realms, including:

Realm name

Authentication method

Users

4Save configuration to server.

5Restart the server to enable the new configuration.

By the end of this process, you’ll have:

At least one realm defined

At least one user set up for authentication using your method

Using Server Manager

We recommend using Server Manager, rather than command-line functions, to perform basic AAA Server configuration and administration.

Server Manager works by loading a duplicate of the current server configuration into a temporary workspace. After you’ve made your changes in the workspace, you save the new configuration to the server itself, then restart the server to enable the changes.

When you leave Server Manager between sessions, it automatically holds your configuration changes in the temporary workspace files. You do not need to save until you are ready to push the configuration to one or more servers.

The Server Manager interface contains four primary work areas:

Interlink Networks, Inc.

Page 13

Image 17
Contents RAD-Series AAA Server Getting Started Guide Trademark Information Table of Contents Technical Support Basic Server Administration LicensingNotational Conventions AudienceCompatibility PreparationSystem Requirements After Installing Before InstallingJava Run-Time Environment UpgradingCertificates Installation Process InstallationYour options are Installing RAD-Series SoftwareRAD-Series 7.1 Getting Started Guide Directory Contains Installation DirectoriesStarting Server Manager Uninstalling RAD-Series SoftwareAccessing Server Manager Starting Remote ControlChanging the Server Manager Port Stopping Server ManagerStarting the Server Adding Servers to Server ManagerTesting Server Installation Using Server Manager ConfigurationConfiguration Process RAD-Series 7.1 Getting Started Guide Define Access Devices Basic Server ConfigurationLoad Configurations Define Local Realms Securing the Server Save ConfigurationsRestarting the Server Where possible, store hashed passwords in user profiles Basic Server Administration Ordering a License Installing the LicenseLicensing Help Desk Technical SupportWeb Site