Onkyo HTX-22HDXPAW, HTX-22HDXST instruction manual Volume Setup, Hdmi Setup

Page 43

Setup—Continued

Volume Setup

This section explains items on the Volume Setup menu.

■MaxVolume

With this setting, you can limit the maximum volume.

The Maximum Volume range is Off, 79 to 30. The default value is Off.

■Pon Vol (Power on Volume)

This setting determines what the volume will be each time the HTX-22HDX is turned on. The range is Last, Min, 1 to 79, Max. The default value is Last.

To use the same volume level as when the HTX-22HDX was last turned off, select Last.

Note:

•The Power On Volume setting cannot be set higher than the Maximum Volume set- ting.

HDMI Setup

This section explains items on the HDMI Setup menu.

■Audio TV Out

This setting determines whether audio received by an HDMI input is output by the HDMI OUT. You may want to change this setting to On if your TV is connected to the HDMI OUT and you want to listen to audio from an HDMI component through your TV’s speakers instead of the HTX-22HDX’s speakers. Normally, this should be set to Off.

Off:

HDMI audio is not output (default).

On:

HDMI audio is output.

Notes:

•If On is selected and the signal can be out- put by the TV, the HTX-22HDX’s speakers will output no sound.

•When TV Control is set to On, this setting is set to Auto.

•With some TVs and input signals, no sound may be output even if On is selected.

•When the Audio TV Out setting is set to On, or TV Control is set to On, and you’re listening through your TV’s speakers (see page 19), if you turn up the volume on the HTX-22HDX, the sound will be output by the HTX-22HDX’s speakers. To stop the HTX-22HDX’s speakers producing sound, change the settings, change your TV’s set- tings, or turn down the HTX-22HDX’s vol- ume.

■Lip Sync

The Lip Sync function can automatically syn- chronize HDMI audio and video that’s gotten out of sync due to the complex digital video processing being performed by your HDMI- compatible TV. With HDMI Lip Sync, the audio delay required to synchronize the audio and video is calculated and applied automati- cally by the HTX-22HDX.

Disable:

HDMI lip sync disabled (default).

Enable:

HDMI lip sync enabled.

Notes:

•This function works only if your HDMI- compatible TV supports HDMI Lip Sync.

•You can check the amount of delay being applied by the HDMI Lip Sync function on the A/V Sync screen (see page 43).

■HDMI control

This function allows -compatible components connected via to be controlled with the HTX-22HDX.

Off:

disabled (default).

On:

enabled.

Notes:

•When you change this setting to On and

close the Setup menu, the names of con- nected -compatible components and “RIHD On” are displayed on the HTX-22HDX.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents HTX-22HDX Using Avis Important Safety InstructionsPower PrecautionsPackage Contents Input Signal Warning Speaker PrecautionsPlacement Using Close to a TV or ComputerContents HTX-22HDXPAW 5.1-channel Amp/Subwoofer FeaturesHTX-22HDXST Front Speakers Features Top Panel and Front Getting to Know the HTX-22HDXDisplay Getting to Know the HTX-22HDXRear Panel Installing the Batteries Remote ControllerAiming the Remote Controller Using the Remote Controller Remote ControllerEnjoying Home Theater Connecting the SpeakersRubber Feet for the Front Speakers Connecting the SpeakersAffixing the Rubber Feet Rubber Feet for the Amp/SubwooferSpeaker Connection Precautions Making the Connections Connecting 5.1 Speakers Connecting only the Front SpeakersRCA Connection Color Coding Connecting AV ComponentsAbout AV Connections Optical Digital JacksMaking Hdmi Connections Connecting AV ComponentsVideo Signals Audio SignalsConnecting AV Components Connecting Components with Digital Outputs Connecting Components with Analog Outputs Direct Change Connecting Onkyo ComponentsAuto Power On/Standby Remote Controller OperationND-S1/Onkyo Dock Linked Functions IPod Alarm FunctionOperating Notes Button active Controlling Other ComponentsControlling an Onkyo Dock iPod DVD Setup button*1Turning On the HTX-22HDX Connecting the Power CordTurning On and Standby Basic HTX-22HDX Operation Playing Your ComponentsPlaying Your Components Setting the Display BrightnessUsing the Sleep Timer Press the remote controller’s Muting but- tonChanging the Input Display Displaying Source InformationPlaying Your Components Selecting the Listening Modes Using the Listening ModesAbout the Listening Modes Using the Listening ModesSpeaker Layout Input Sources  Listening ModesOnkyo Original DSP Modes Listening Description Input Speaker ModeLate Night Function Adjusting Speaker LevelsSetup Menus SetupChanging Settings On-screen Setup MenusSp Config Speaker Configuration Sp Distance Speaker Distance Audio AdjustLevel Cal Level Calibration Center Image DimensionPanorama Center WidthSync Source SetupIntelliVol IntelliVolume Front 5.1chHdmi Setup Volume SetupTV Ctrl TV Control Pow Control Power ControlARC Audio Return Channel AutoAuto Power Down Specifying the Digital Signal FormatTroubleshooting Troubleshooting Troubleshooting About Copyright Protection Hdmi High-Definition Multimedia InterfaceAbout Hdmi Supported Audio FunctionalityHdmi High-Definition Multimedia Interface Audio Outputs SpecificationsSubwoofer System with Built-in Amplifier HTX-22HDXPAW Audio InputsFront Speaker HTX-22HDXST SpecificationsFor -compatible players/recorders Using an -compatible TV, Player, or RecorderAbout -compatible components Players/RecordersOperate with the remote controller Using an -compatible TV, Player, or RecorderConnections and Set Up Confirm the settingsUsing an -compatible TV, Player, or Recorder Onkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

HTX-22HDX, HTX-22HDXPAW, HTX-22HDXST specifications

The Onkyo HTX-22HDXST, HTX-22HDX, and HTX-22HDXPAW are distinguished home theater systems designed to elevate your audio experience in the comfort of your home. Each model brings unique features and technologies that cater to various preferences while delivering a premium sound experience.

The Onkyo HTX-22HDXST is known for its compact design, making it an excellent choice for those with limited space without compromising on sound quality. This system integrates a 2.1-channel audio setup, featuring powerful satellite speakers paired with a robust subwoofer that enhances bass performance. It supports multiple connectivity options, including HDMI, optical, and stereo inputs, allowing for seamless integration with various devices, from televisions to gaming consoles.

The HTX-22HDX model stands out due to its versatile Bluetooth capabilities, enabling users to stream music directly from smartphones or tablets. This feature is particularly convenient for those who prefer wireless audio streaming, making it an ideal solution for modern home audio needs. The system also employs Dolby TrueHD and DTS-HD Master Audio decoding, which ensure that high-definition soundtracks are rendered with remarkable clarity and detail, enriching the cinematic experience.

Meanwhile, the Onkyo HTX-22HDXPAW offers an enhanced audio performance with its upgraded components. This model features a more powerful subwoofer, which delivers deep, impactful bass that brings movies and music to life. Additionally, the HTX-22HDXPAW includes a user-friendly interface along with an easy-to-navigate setup process, allowing users to experience immersive sound without the hassle of complicated configurations.

All three models feature advanced amplification technology designed to optimize audio performance while minimizing distortion. The systems often come with a built-in equalizer, allowing users to tailor sound profiles to suit their specific preferences.

Overall, the Onkyo HTX-22HDXST, HTX-22HDX, and HTX-22HDXPAW represent a blend of sophistication and practicality, catering to audiophiles and casual listeners alike. With their impressive array of features and superior sound quality, these systems are sure to enhance your home entertainment experience, making every movie night or music session truly captivating.
Top Page Image Contents