Programmed MP3 playback

MICRO1468I.book Page 13

Using the CD

DON’T FORGET! The MP3 disc must be in stop mode.

1Press the C-ADJ/MEMORY or MEMORY button. The following information will show in the display.

Listening to programmed MP3 tracks

1Press the PLAY/PAUSE button.

2Disc play will start at the beginning of the first programmed track.

2Press the SKIP/TUNE buttons to select the folder. Press the C-ADJ/MEMORY or MEMORY button to confirm the folder.

3To select the track, press the SKIP/TUNE buttons.

4Press the C-ADJ/MEMORY or MEMORY button to confirm the track.

5Repeat the steps 2 to 4 to select the next folder and track to be programmed.

6Continue entering the tracks in this way until all the desired track are stored (up to a limit of 99).

When the C-ADJ/MEMORY or MEMORY button is pressed to store the 99th track, it will show “FUL” on the display.

DON’T FORGET! If the PLAY/PAUSE button is pressed before the C-ADJ/MEMORY button is pressed, that track will not be programmed, and the disc will start playing from the first programmed track. Any track can be programmed to play more than once.

To Clear the Program Memory

If the disc is playing, press the STOP button twice, or Select IPOD, AUX or TUNER to clear the program.