Goodmans MICRO1468I instruction manual Using the radio

MICRO1468I.book Page 8 Tues

02Using the radio

Basic operation

1Press the STANDBY button on the main unit or remote control to power on the unit.

2Press the FUNCTION button on the unit or on the remote control to select Tuner mode.

3Tune to the station you want by pressing either of the SKIP / TUNE buttons.

4To turn off the unit, press the STANDBY button.

2Press the MEMORY button on the remote control, “MEMORY” will flash in the display and a preset number “1” will also show on the display.

3Press the M-UP or M-DOWN buttons on the remote control to select the preset station number where you want to save the station.

4Press the MEMORY button again to store the station into the chosen preset number.

DON’T FORGET! Repeat the above steps to save all of your other stations.

Manual and automatic tuning Selecting a saved station

1To manually tune in a station, briefly press either of the SKIP / TUNE buttons.

2To start automatic tuning, press and hold either of the SKIP / TUNE buttons for more than 2 seconds.

DON’T FORGET!The unit will automatically search for the first available station with a strong signal.

Saving radio stations to memory

DON’T FORGET!You need to use the remote control to save radio stations to memory.

You can save up to 20 FM radio stations to the memory.

1Tune in to the station you want by pressing either of the SKIP / TUNE buttons on the remote control.

Press the M-UP or M-DOWN buttons on the remote control to choose the saved station that you want to listen to.

Antenna

DON’T FORGET!For optimum FM reception there is a built-in FM antenna wire on the back of the unit. Move the wire around to get the best reception.

FM and FM Stereo reception

When the unit is tuned in to a stereo broadcast with a good signal, "STEREO" will be shown in the display.

If an FM station is received, but has interference, it is recommended to switch to Mono mode using the ST/MO button on the remote control.

8