Goodmans MICRO1468I Using the Clock and Timer, Adjusting the clock, Setting the timer

MICRO1468I.book Page 14

05Using the Clock and Timer

Adjusting the clock Switching off the timer function

DON’T FORGET!This unit has its own digital clock when in standby mode.

To adjust the clock and set the timer, follow the instructions below:

1Press the C-ADJ/ MEMORY button and select either “24 hour” or “12 hour” mode using the SKIP / TUNE buttons.

2Press the C-ADJ/ MEMORY button to confirm.

3The Hour digits will begin to flash. Adjust the hours by pressing the SKIP / TUNE buttons.

4Press the C-ADJ/ MEMORY button again, and the minute digits will begin to flash.

5Adjust the minutes by pressing the SKIP / TUNE buttons.

Setting the timer

1Press the C-ADJ/ MEMORY button again, “TIMER ON” will show in display.

2Repeat the above procedure to set the “TIMER ON” hours and minutes digits.

3Press the C-ADJ/ MEMORY button again, “TIMER OFF” will show in the display.

4Repeat the above procedure to set the “TIMER OFF” hours and minutes digits.

5Press the C-ADJ/ MEMORY button again, “TIMER OFF” will flash in the display.

6Press the SKIP / TUNE buttons to select "TIMER ON"

7Press the C-ADJ/ MEMORY button to confirm the Timer settings. The display will then return to the current time.

DON’T FORGET! The clock setting will be lost if the power is disconnected.

14

1Press the C-ADJ/ MEMORY button until “TIMER ON” flashes in the display.

2Select “TIMER OFF” by pressing SKIP / TUNE buttons.

3Press the C-ADJ/ MEMORY button to cancel the timer.

Setting the sleep timer

DON’T FORGET!You need to use the remote control to use this function.

The Sleep Timer is a countdown timer for switching the system to standby mode after a specified time. It enables you to listen to the radio, a CD or iPod. The Sleep Timer can be set from 90 to 10 minutes in 10 minute steps.

1Switch on the system by pressing the STANDBY button.

2Select the desired source by pressing the FUNCTION button.

3Press the SLEEP button to set the sleep time. - "SLEEP" and "90" are shown in the display. The system will now play for 90 minutes.

4To decrease the sleep time in steps of 10 minutes, continually press the SLEEP button until the desired sleep time is shown.

5To cancel the sleep timer, press the SLEEP button until the display returns to the previous mode.

6To switch off the system before the sleep time has elapsed, press the STANDBY button.