Gateway SYSMAN017AAUS manual Your First Solo Flight, Unit AC adapter AC power cord

Your First Solo Flight

By now you’ve unpacked your Gateway 2000 Solo™ Multimedia Notebook, and you’re just a few steps from really taking off.

1.If you haven’t done so already, take the time now to connect your unit to an AC power source as shown below.

The unit The AC adapter The AC power cord

(Use AC power as the battery in your unit is probably dead. An installed battery automati- cally charges itself, however, as long as the unit is connected to AC power. In order to optimize the battery’s life and performance, allow it to charge overnight and then completely discharge it through normal use. Do this twice for best results.)

2. Slide the	3. Press the	4. The Windows® 95 logo
cover latch to	power	appears on the screen.
the right to	button to	(Windows® for Workgroups
open the unit.	turn the unit	users must type win at the
	on.	C: prompt and press Enter.)

5.Your system is now ready to fly. Continue navigating your own path, or, if the CD-ROM drive is installed, follow the steps below to take a quick ride with the Gateway 2000 Solo System CD.

A. Press the eject	B. Insert the Gateway	C. Close the drive	D. Slide a finger on the pad to move
button on the	2000 Solo System	tray.	the cursor onto the MEETSOLO
CD-ROM drive.	CD.		icon in the CD’s directory. Tap
			twice to double-click the icon.