Password Setup Menu

26 The Gateway 2000 Solo Multimedia Notebook

Option	Controls	To Change
Time	unit’s clock/time	select; press Enter; type correct time; press Enter.
Date	unit’s calendar/date	select; press Enter; type correct date; press Enter.
Boot Drive	which drive unit boots from	select; press Spacebar to toggle between:
		HDD-unit boots from hard drive
		FDD/HDD-unit tries to boot first from floppy
		drive; if unsuccessful, boots from hard drive.
Boot Display	which display(s) the unit uses	select; press Spacebar to toggle between:
		LCD-only uses unit’s screen;disables VGA port
		CRT-only uses external monitor
		LCD&CRT-can use both types of screen at once.
Power Switch	function of power switch	select; press Spacebar to toggle between:
		ON/OFF-system reboots (or shuts off completely)
		when switch is pressed.
		SUSPEND/RESUME-system enters suspend
		mode (or resumes from suspend mode) when
		switch is pressed.

After changing an option, feel free to change another option, select another menu, or exit the Setup Menus.

To select one of the Additional Setup Menus from the right side of the Main

Setup Menu: press the appropriate arrow key(s) to move the highlighted box onto the desired menu. When the desired menu is selected, press Enter.

This menu allows you to enable or disable password protection for the system as well as set or change the password. Access this menu from the Main Setup Menu (See page 25.)

The following chart details the process for setting the Password Setup Menu options. (After setting an option, the screen automatically returns to the Main Setup Menu.):

Option

Controls

To Change

Password Setup Menu