Speaker Precautions—Continued
Speaker care
Wipe the cabinet occasionally with a dry silica or soft cloth. For heavier dirt, after dampening a soft cloth in a weak solution of mild detergent and water and wringing it out dry, wipe off the dirt. Then, dry immediately with a clean cloth. Do not use rough material, thinners, alco- hol or other chemical solvents or cloths since these could damage the finish, remove the panel lettering, or cause discoloration. If you are using a chemical cloth, always follow the instructions that come with the cloth. For dust accumulated on grilles, use a vacuum cleaner or brush it off.
Power Cord Precautions
•Before connecting the power cord, connect all of your speakers and AV components.
•Turning on the
Speaker Stand AS-140 Precautions
1.Be sure to tighten the screws when you assemble the speaker stands and attach the brackets to the speak- ers.
2.The speaker stands are tall. Install the stands in a manner that will not allow the speakers to tip over. You may want to use commercially available chains to prevent the stands from falling in the event of an earthquake.
3.Do not place the stands on an unstable table, slope, or thick carpet. Otherwise, the stands may fall, caus- ing injury.
4.Place the stands in a location in which they would not cause injury if they accidentally fell.
5.Do not place the stands in an area at risk of fire or damage, such as near a fireplace, heater, glass win- dow, etc.
4