Getting to know Your Speaker Package—Continued
4 While pressing in the lever on the speaker terminal on the rear panel of the speaker, connect the speaker cable to the terminal.
The supplied speaker cables are
Speaker rear panel
5 (1) Insert the hook on the pipe stand into the key hole on the speaker’s rear panel, then (2) press and slide the speaker downward.
(2)Press and slide the speaker downward.
Pipe stand
(1) Insert the hook into the hole on the speaker’s rear panel.
Note:
Be careful not to pinch the speaker cable between the pipe stand cover and the speaker’s rear panel.
6 Attach the pipe stand to the speaker securely using the included screw (large).
Screw (large x 1)
7 Completed.
Caution:
To remove the speaker from the stand, remove the screw, slide the speaker upward to release the hook, and reverse the steps for installing the speaker to the stand.
Center Speaker Base
The center speaker base is for mounting the center speaker horizontally. If you put it on a TV stand or AV stand, aim it toward the listening position. The center speaker should sit securely on the base. If it’s loose, try resetting it.
The cradle surface of the base features two stoppers to prevent the speaker from moving. Therefore, you can tilt the speaker toward the front by up to 11 degrees.
11
Stoppers
Base for horizontal mounting
■Using the included rubber spacers
We recommend using the supplied rubber spacers to achieve the best possible sound from your speakers. The rubber spacers prevent the speakers from moving, pro- viding a more stable setup.
Rubber spacers
Front
Bottom of the base
7