Compaq PC CARD ADAPTER manual Using the Auto Link, Feature for N ET Ware

3	USING THE AUTOLINK
	FEATURE FOR NETWARE

The AutoLink feature for NetWare configures the adapter as a NetWare DOS ODI client. The AutoLink installation steps are depicted in Figure 3-1.

If memory manager is installed,

exclude memory range

CC000 – D3FFF

Insert TokenDisk diskette.

Make diskette drive active.

Type: AUTOLINK

Select ring speed

Reboot computer

Figure 3-1 AutoLink Installation Process

This chapter describes the AutoLink program requirements, ways to avoid memory conflicts, and installation steps. See Chapter 4 for additional network drivers information.

The AutoLink program performs the following functions:

■Configures the 3C689 adapter.

■Tests the adapter.

■Installs the DOS ODI client driver.

■Logs on to the server and updates the NetWare client software if a 3Install account exists on the server; otherwise, the client software is installed from the TokenDisk diskette.