Compaq PC CARD ADAPTER manual Saving Settings to Use for Installing Other Adapters

4-6 CHAPTER 4: STANDARD INSTALLATION AND CONFIGURATION

4Use the arrow keys to scroll through the list of valid settings for each parameter. To select a setting, press [Enter].

Press [F1] for information about the settings.

5Continue this procedure with any other parameters that you want to change.

6To save the new settings to the NET.PCM and the PROTOCOL.PCM files, press [Tab] to highlight <OK>. Press [Enter].

This completes the parameter changes for the selected setting(s). The next step is to install the network drivers. See Chapter 5.

Saving Settings to Use for Installing Other Adapters

If you want to use the same settings on other adapters, you can save the configuration settings to a .SET file stored on the copy of the TokenDisk diskette. To save the settings, follow these steps:

1Complete steps 1–5 in the previous procedure.

2Select Save under the <File Options> command button in the Adapter Configuration dialog box.

3Use the arrow keys to select the directory where you want to save the file.

4Press [Enter].

This saves the settings to the selected directory.