Compaq PC CARD ADAPTER manual Using Auto Configuration, Type at the prompt

Using Auto Configuration 4-3

2Use a text editor to edit the CONFIG.SYS file on your computer.

3Exclude the memory range that the 3C689 adapter is using. For example, type this line into the device section of the new CONFIG.SYS file:

device=c:\windows\emm386.exe x=CC000-D3FFF noems

where x stands for exclude, followed by the memory range that the adapter is using.

Refer to the manual that accompanied the memory manager software for additional instructions and information.

4Save the CONFIG.SYS file and exit the text editor.

5Reboot the computer.

This completes the procedure for avoiding conflicts with a memory manager. You are now ready to configure the adapter.

Using Auto Configuration

The Auto Configure the 3Com PC Card Adapter option on the main menu configures the adapter. To perform the auto configuration procedure, follow these steps:

1Place the TokenDisk diskette in a floppy drive on your computer and make that drive the active drive. For example, type:

A:[Enter]

2Type at the prompt:

INSTALL [Enter]

3The first time you use the TokenDisk diskette, the 3Com software license box appears. To continue with the program you must enter Y for Yes.

The AutoLink information screen appears. Press [Enter] to continue. The main menu appears.