Compaq PC CARD ADAPTER manual When Tests Fail

Using the TokenDisk Diskette Diagnostic Program 6-7

2Press [Tab] to move from field to field and highlight any field within the Test Setup dialog box.

Within the Group Select area, use the arrow keys to highlight Group 1 or Group 2. Use the <Enable Group> or <Disable Group> command buttons to enable or disable a group of tests.

Press [F1] for a description of these tests.

3When you are satisfied with the new test setup, highlight the <OK> command button and press [Enter].

4To run the tests, choose Run Tests from the Test menu and select the <Start> button.

When Tests Fail

If the diagnostic tests fail, the adapter may not be defective. The problem may be incorrect configuration settings, configuration settings that conflict with the settings of other boards, or improper installation.

If any test fails, you can get additional information by highlighting the test that failed in the Run Tests dialog box shown in Figure 6-4, and pressing [Enter]. You can also highlight the <Zoom> command button and press [Enter]. The program notifies you of the error and suggests actions you can take to solve the problem.