Compaq PC CARD ADAPTER manual I N N U

6-4 CHAPTER 6: TROUBLESHOOTING

The following instructions assume that you have started the program and are at the main menu. To start the diagnostic tests, follow these steps:

1Select the option Configuration/Diagnostic/Troubleshooting, as shown in Figure 6-2.

TokenDisk for the TokenLink III PC Card Adapter

ESC=Cancel	F1=Help
M A I N	M E N U

Auto Installation with Configuration (AutoLink)

NetWare DOS ODI Client

Standard Installation and Configuration

Auto Configure 3Com PC Card Adapter

Network Drivers ...

Configuration/Diagnostic/Troubleshooting ...

General Information/Release Notes

Program & information for configuring/testing/troubleshooting adapters

[ENTER]=Execute Function [−↓]=Scroll

[F1]=Help [ESC]=<Cancel>

Figure 6-2 Main Menu with Configuration/Diagnostic/Troubleshooting Selected

2When the Configuration and Diagnostic screen appears, select Configuration and Diagnostic Program.

Figure 6-3 shows the subsequent screen, indicating the installed adapter and its token ring address.

3From the Test pull-down menu, select Run Tests, as shown in Figure 6-3.

The Run Tests dialog box appears, as shown in Figure 6-4.