JVC DLA-HD100 manual Image Gamma

4 Settings

Setting Menu (Continued)

Image > Gamma

HGamma

Sets the gradation characteristics of the projected image.

Normal	For normal circumstances, select this setting.
Theater1	Sets gamma to “Theater1”.
Theater2	Sets gamma to “Theater2”.
Dynamic	Select this when in well-lighted areas (such as living room) or when playing games.
Custom	The gamma can be set according to your preferences.
(Gamma Setup)
	Correction Value	The coefficient (1.8 f 2.6) of the gamma curve can be selected.
		The gamma curve for the colors (R, G, B) can be adjusted
	Gamma Adjust *	separately.
		Adjusting “W” will adjust for all “R, G, B” values. Gamma curves
		are represented by a “G”.
	Save	Saves the adjusted gamma data.
	Load	Loads the gamma data that was saved.
	All Reset	Returns the gamma coefficients to the values set by “Correction
		Value”.

z“Normal” is suitable for normal circumstances but other settings can be selected according to your preferences.

zThis setting can also be configured from the remote control. (pP12)

*“Gamma Adjust”

ASelect the reference gamma curve coefficient (1.8 f 2.6) in “Correction Value”.

BSelect the color to be adjusted in the gamma adjustment screen.

Correction Value

Gamma Adjust

W

R

Save

G

Load

B

All Reset

CAdjust the gamma curve in the gamma curve adjustment screen.

Correction Value	1023	Correction Value	1023
Gamma Adjust		Gamma Adjust
Save		Save

Load	512	Load	512
All Reset		All Reset

Adjustment Point (R)						Adjustment Point (R)
X:	5	%				X:	5	%
Y:	51					Y:	51
			0	50	100 (%)				0	50	100 (%)

Select the point where the gradation (brightness) is to be adjusted with the H / I buttons.

DTo end

Adjust the gradation (brightness) with the J / K buttons.

EXIT EXIT EXIT

Do you save gamma data?

Yes : Push [ENTER] button

No : Push [EXIT] button

ENTER

zIf gamma curve is adjusted repeatedly, calculation errors will be accumulated and the gamma curve may not be able to revert back to its original form. In that case, select the coefficient in “Correction Value” again or retrieve the previous gamma data using “Load”.

26