ENGLISH
Install. > Line Display
a Line Display
Sets whether to display the input when switching input.
| 5 sec | Displays for 5 seconds. |
|
|
|
| Off | Do not display. |
|
|
|
Install. > Flip H
b Flip H
Select this when the image is projected from the back of the screen or when the projector is hung from the ceiling.
| Off | Do not flip image to the left or right. |
|
|
|
| On | Flips image to the left or right. |
|
|
|
Install. > Flip V
c Flip V
Select this when the projector is hung from the ceiling.
| Off | Do not flip image up or down. |
|
|
|
| On | Flips image up or down. |
|
|
|
Install. > High Altitude Mode
d High Altitude Mode
Select this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).
| Off | Do not activate. |
|
|
|
| On | Activate. |
|
|
|
Func. > Back Color
e Back Color
Configures the screen color displayed when there is no input signal.
| Blue | Sets screen color to “Blue”. |
|
|
|
| Black | Sets screen color to “Black”. |
|
|
|
Func. > Sleep Timer
f Sleep Timer
Sets the lapse time before automatically switching to the standby mode when there is no input signal.
| 15 | Switch to standby mode after 15 minutes. |
|
|
|
| 30 | Switch to standby mode after 30 minutes. |
|
|
|
| 60 | Switch to standby mode after 60 minutes. |
|
|
|
| Off | Do not switch to standby mode. |
|
|
|
Getting Started
Preparation
Basic Operation
Settings
Troubleshooting
Others
31