ENGLISH
How to Use the Remote Control
Loading Batteries
zIf the remote control has to be brought closer to the projector to operate, it means that the batteries are wearing out. When this happens, replace the batteries. Insert the batteries according to the +- marks.
zBe sure to insert the - end first.
zIf an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again and operate the remote control.
The following instruction applies only to the use in Holland.
Effective Range of Remote Control Unit
When directing the remote control
Getting Started
Preparation
Basic Operation
toward this unit
This unit
zWhen aiming the remote control towards the remote sensor on this unit, ensure that the distance to the sensor in front or at the rear of this unit is within 7 m.
zIf the remote control fails to work properly, move closer to this unit.
Remote Control
When reflecting off a screen
zEnsure that total of distance A between this unit and screen and distance B between remote control and screen is within 7 m.
zAs the efficiency of signals reflected from the
remote control unit differ with the type of |
| |
screen used, operable distance may | This unit | |
decrease. | ||
|
Screen
Remote Control
Settings
Troubleshooting
Others
17