ENGLISH
E Adjust the image size (zoom)
BiggerSmaller
Hold and rotate the tab
F Adjust the focus
Turn the ring and adjust
G Turn off the power
While a confirmation screen is displayed
Blinking (Red)
Cool Down mode
Light on (Red)
zThe power cannot be turned off within approximately 90 seconds after it has been turned on. Start operation only after 90 seconds time.
zYou can also press the [STANDBY/ON] button on the unit to turn off the power. (pP15)
zPut back the lens cap after use to prevent the lens from dirt.
zPull out the power plug when the unit will not be used for a prolonged time.
TIPS
You can hide the image temporarily
You can hide the image temporarily.
Green light blinks when
the image is hidden
zPress the [HIDE] button again to display image.
zThe power cannot be turned off when the image is temporarily hidden.
MEMO
About Cool Down mode
zThe Cool Down mode is a function to cool down the lamp for approximately 60 seconds after projection is complete.
This function prevents the internal parts of the unit from deformation or damage due to overheating of the lamp. It also prevents lamp blowout and premature shortening of lamp life.
zDuring Cool Down mode, the [STANDBY/ON] indicator blinks in red.
zAfter the Cool Down mode is complete, the unit automatically returns to standby mode.
zDo not pull out the power plug during Cool Down mode. This may shorten the lamp life and cause a malfunction.
Getting Started
Preparation
Basic Operation
Settings
Troubleshooting
Others
25