Listening to DAB Digital Radio
| TUNING/CH |
AUTO SCAN | BAND |
TUNING/CH /
AUTO SCAN
BAND
Press the [BAND] button repeat- edly to select DAB.
The indicator lights up.
Remote controller
When tuned into a DAB station, the
TUNED indicator appears.
DAB indicator | Tuned indicator | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Station name
Selecting DAB for the Very First Time
The very first time you select DAB, the Auto Tuning function automatically scans the DAB Band III and
Once the scanning process is complete, the first station that was detected is selected.
Using the Auto Tuning Function Manually
If a new DAB station is introduced, or you move to a new area, you can run the Auto Tuning function again.
To start the Auto Tuning function, press the [AUTO SCAN] button.
The number of stations found and the scanning progress are shown on the
Remote controller display.
To cancel Auto Tuning, press the [AUTO SCAN] button again.
Selecting DAB Stations
Use the TUNING/CH []/[ ] but- tons to select a DAB station.
If a secondary service is available, a right angle bracket (>) is displayed.
Remote controller Press the Right Arrow [ ] button to listen to the secondary service.
“>”
While the secondary service is selected, a left angle bracket (<) is dis- played and SECONDARY indicator lights up. Press the Left Arrow [] button to return to the primary service.
“SECONDARY”
“<”
When you select a station that you’ve selected a lot in the past, the letter F (short for Favorite) is displayed.
“F”
If you select a station that cannot be received properly, a question mark (?) is displayed.
“?”
19