Listening to DAB Digital Radio—Continued
Scan Mode
This setting determines which DAB bands are scanned by the Auto Tuning function (see page 19).
Use the Left and Right Arrow [ ]/[ ] buttons to select the following options, and then press [ENTER].
UK: Band III
WorldW (Worldwide): Band III
DRC Value
With the DRC (Dynamic Range Control) setting, you can reduce the dynamic range of DAB digital radio so that you can still hear quiet parts even when listening at low volume
Use the Left and Right Arrow [ ]/[ ] buttons to select from the following options, and then press [ENTER].
1 (default): Large reduction in dynamic range.
1/2: Small reduction in dynamic range.
0: DRC off.
Band
With the Band setting, you can choose the DAB band you want to use, and display the current reception qual- ity and the reception quality necessary to decode the current multiplex.
Use the Left and Right Arrow [ ]/[ ] buttons to select from the following options, and then press [ENTER].
Band III: 5A–13F
L-Band: LA-LW
Display example:
Channel | If reception is poor, “Bad” is |
| displayed. If reception is |
| good, “Good” is displayed. |
You can adjust the position and direction of the DAB antenna while monitoring the signal strength on the dis- play.
To make “Good” appear, adjust the antenna to get the best signal strength.
21