What to do when these messages are displayed
Message | Cause (Contents) |
|
|
When the “Lamp time” reaches 1000 hours
[A message indicating “1000h” appears on the projected screen.
1000h | • Press [EXIT] button to delete the message. |
| |
| EXIT |
Lamp replacement
When the accumulated lamp time reaches between 1900 hours to 2000 hours, “Lamp replacement” message appears on the screen each time the projec- tor is turned on.
• Press [EXIT] button to delete the message.
[Prepare a replacement lamp and install as quickly as possible.
EXIT
Lamp replacement
Warning
EXIT
The word “Warning” appears and blinks when the accumulated lamp time reaches 2000 hours.
The message can be cleared by pressing the [EXIT] button. However, the same message will
Once the projector is turned off, it cannot be turned on again if the accumu- lated lamp time has exceeded 2000 hours.
When the accumulated lamp time reaches 2010 hours, the projector shuts down and cannot be turned on again.
[Replace the
Note
•The message display language corresponds to the menu language setting. This is set to [English] when the projector is bought. The dis- play language can be selected from among 8 languages. (☞ page 39) However, the input mode ([PC1], [PC2], [PC3], [Y/C], [VIDEO]) and button indications ([FREEZE], [D.ZOOM], [EXIT]) are only displayed in English irrespective of the display language setting.
54